Table of Contents
Advertisement
Wire it up!
In this section we will connect all audio and video cables
that you will use to capture audio and video and then
send audio and video back to a tTV or VCR for viewing
or recording.
1. Connect your video source (VHS, DVD, Laser Disc
Player, TV. etc.) to your USB Instant DVD.
2. Connect your 6 ft. A/V in cable to the 3 RCA jacks to
your analog audio/video source RCA line out.
The other end connects to the "RCA Video In" jack and
"Audio In" jack on the back of your USB Instant DVD.
This step is optional, if you dont plan to send video
back to tv or vcr, skip to software installation.
Connect your USB Instant DVD to your TV or VCR. This
will send captured or edited video back to your TV or
VCR for viewing or recording.
Connect RCA cable to "Video Out" on Instant DVD
Connect other end to Video IN on your TV or VCR.
Connect the Audio Out of your PC to the Audio In
on your TV or VCR. This will send recorded audio
from your PC out for recording or listening on
your TV or VCR.
USB Instant DVD for Mac 10
Advertisement
Table of Contents
