ADS Technologies PTV-305 Software User's Manual page 44

BURNING YOUR MOVIE TO DISC
When you're all ready to go, click on "Write Disc." You can preview your movie with the virtual
remote control. It should work similarly to a standard DVD player remote control. Use it to navigate
through your various menus and playback your movie. If you're creating a VCD, press the
corresponding number to view the chapter.
Once you're ready to burn your movie to disc, click "Start." You'll be prompted to save your project.
Then, there are just a few things you need to set before the program begins compiling your final
movie and burning it to disc.
1. First off, choose the playback format. If you're in the US, choose NTSC. Most of Europe uses PAL.
2. Next, choose where you wish to save the movie. From the pull-down, choose your DVD burner
drive (or your hard drive if you're saving your movie locally).
3. In the Disc Label field, enter in a title for your movie.
4. Lastly, depending on where you're saving your movie, you can choose the burn speed of the
drive, or the directory on your hard drive to which the movie will be written.
5. When you're ready to go, click "OK." That's it! From here on, the program takes care of the rest.
Your movie will be converted into DVD (or VCD) format, and then burned to your disc (or hard drive).
That's it! From here on, the program takes care of the rest. Your movie will be converted into DVD
(or VCD) format, and then burned to your disc (or hard drive).
page 44