Table of Contents
Advertisement
Safety information
1.2 Safety and application instructions
1.2
Safety and application instructions
The safe use of electric motors
Rotating or live parts
These electric motors are designed for use in industrial high-voltage installations. Rotating
or live and uninsulated parts pose a danger.
Fatal or severe injuries and substantial material damage can occur if the required covers
are removed without authorization or if the equipment is not handled, operated, or
maintained properly.
If the motors are used outside industrial areas, the installation site must be safeguarded
against unauthorized access by means of suitable protection facilities (e.g. fencing) and
appropriate warning signs.
The persons responsible for the safety of the system are under an obligation to ensure that:
● the basic planning work for the system and all work relating to transportation, assembly,
● these instructions and the motor documentation are made available at all times while
● the technical data and specifications relating to the permissible installation, connection,
● the system-specific erection and safety regulations are observed and personal protective
● work on these motors, or in the vicinity of these motors, by unqualified persons is
These instructions therefore only contain the information which is necessary for the motors
to be used by qualified persons in accordance with their intended purpose.
Note
We recommend engaging the support and services of your local Siemens service center for
all planning, installation, commissioning and maintenance work.
[ID 2.01]
1.3
Electromagnetic compatibility
Instructions relevant to safety
When used properly, the motors of the enclosed design (IP 54 and higher) satisfy the
requirements of the EC Directive on electromagnetic compatibility 89/336/EEC.
8
WARNING
installation, commissioning, maintenance and repairs are carried out by qualified persons
and checked by responsible, suitably skilled persons.
work is in progress.
ambient and operating conditions are taken into account at all times.
gear is used.
prohibited.
A5E01083943A AB
Siemens AG Operating Instructions 2.02 1FW4
Advertisement
Table of Contents
