Safety; Intended Use; Health And Safety - Litepanels Apollo User Manual

Safety

Intended Use

This product is intended to transmit and receive lighting control data
in a dry environment. Always follow the safety guidelines.
Not for use as a router or access point for life saving applications or
for medical equipment

Health and Safety

WARNING! Risk of personal injury or injury to others. All
!
personnel must be fully trained and adhere to correct manual
handling techniques and Health and Safety regulations. It is
the responsibility of the local organisation to enforce safe working
practices at all times.
Humidity and Condensation! Risk of electric shock
and fire.
CAUTION! Never expose the product to rain or moisture as
! condensed moisture may damage the product electrically
when switched on
CAUTION! Never cover the Apollo Wireless DMX Bridge
!
during operation. Keep a minimum clearance of 4 inches
around the housing for ventilation and air circulation
CAUTION! Avoid direct illumination by other luminaries or
!
other heat sources. Check the mains cable and connector
cable prior to every operation for damage.
WARNING! In case of visible damage to the mains cable or
!
the housing, the device must not be operated any longer.
Damaged components must be replaced by a Litepanels
service center.
2
Maintenance
WARNING! The fitting of non-approved parts and or
accessories or servicing by non-approved personnel could
!
effect the safety of the product. It may also invalidate the
terms and conditions of the product warranty.
There are no user serviceable parts inside the enclosure. Only a
Litepanels qualified service center may open the Apollo Bridge.
The Apollo system is intended for professional use and may only be
operated by qualified persons.
Please read these instructions carefully before using the product for
the first time. The following text contains important information for
safe handling.
NOTE! To check for updates to the Operators Manual,
visit:
www.litepanels.com