Advertisement
2. introduction
Features spring loaded telescopic arms extendable from 1200mm to 1750mm, enabling use on a variety of vehicles. Arms feature padded hooks
to ensure bodywork is not damaged in use. Fitted with 3 x 5W CoB leds providing up to 1000 lumens of light output. each light has a 40° angle
adjustment to ensure required area is illuminated, whilst alleviating shadow effects. Includes battery level indicator, USB plug and charger cable.
3. speciFicAtion
model no ................................................................... led137
Battery ..................................................... 3.7V 10.4Ah li-ion
led Quantity ...................................................... 3 x 5W CoB
lumen output ............................................................ 1000lm
min./max length. .............................................. 1200/1750mm
Charging Time ................................................................. 6hrs
operating Time ............................................................. 15hrs
Power .......................................................................... 3 x 5W
IP Rating .........................................................................IP40
4. cHArGinG
4.1.
The battery fitted to this lamp is considered to be a consumable item and its ability to accept charge will reduce over time. We will
warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the battery is not
properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace the
battery even if it is less than one year old.
4.2.
Connect the charger into the charging port on the lamp, see fig.1. Plug into power supply and turn on, the charge leds on the lamp
will light as the battery charges. When fully charged all four lamps will be lit.
4.3.
When the battery has fully charged (approx 6hrs) disconnect from mains supply.
note: The lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without
another charge.
5. operAtion
5.1.
Place the padded hook at the end of the lamp, over one edge of the bonnet and gently pull the lamp towards the other side of the
bonnet.
5.2.
Steady the lamp with one hand, whilst extending the hook over the other side of the bonnet.
5.3.
To use the lamp, scroll through the three settings using the on/off switch. Press once for middle light, once more for two lamps and a third
press brings the third lamp on. The charge status leds will light when the on/off switch is pressed.
6. mAintenAnce
6.1.
Keep lamp clean and check for damage before every use. If damage is observed, remove from use until unit is repaired.
Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500
bAtterY removAl
Remove the 12 screws in the black section of the lamp to remove the batteries.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey ltd's Batteries Producer Registration number (BPRn) is BPRn00705.
environment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee reGulAtions
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7Ar
01284 757500
© Jack Sealey limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
led137 | Issue:3 (1,3) 28/05/19
Advertisement
