Connect The Molex Power Supply To The Pyro Card Power Connector; Mount The Pyro 1394 Pci Card In Place With A Screw; Replace The Computer’s Panel/Shell And Screw It Back In Place; Connect The Power Cable And Turn On Your Computer - Pyro Industries API-1394PCI Install Manual

Step 9 (optional)
Connect the molex power supply to the
PYRO card power connector.
Step 10
Mount the PYRO 1394 PCI Card in
place with a screw. Make sure the
screw is firmly tightened so the PYRO
1394 PCI Card does not slide out of its
seated position.
Step 11
Replace the computer's panel/shell and
screw it back in place with the screws
you removed in step 2.
Step 12
Now that your PYRO 1394 PCI Card is
installed and the shell is in place, you
can safely connect the power cable.
Now turn on your computer.
When you turn on your computer
Windows will automatically install the
necessary drivers.