Locate An Available Pci Expansion Slot; Remove The Knockout On The Back Of Your Computer; Push The Pyro 1394 Pci Card Firmly Into The Pci Slot - Pyro Industries API-1394PCI Install Manual

Step 5

Locate an available PCI expansion slot

(usually white/beige in color). This will
be in the area of your computer where
other cards that look similar to the
PYRO PCI card are installed.
Step 6
Visually confirm that the PYRO 1394
PCI Card will fit into the available slot
you have chosen.
Step 7
If necessary, remove the knockout on
the back of your computer which cor-
responds to the PCI slot you have
confirmed as your selection. If there is
a screw, place it in a safe place as you
will be using it to attach the PYRO 1394
PCI Card.
Step 8
Push the PYRO 1394 PCI Card firmly
into the PCI slot. Apply pressure as
needed (but do not force the card) until
the edge connector is completely in the
slot.