HP Redundant Power Supply
HP Redundant Power Supply
At A Glance
The HP J2962A Redundant Power Supply (hereafter RPS) provides
redundant DC power to HP products that contain a redundant power supply
connector.
Features
Network Connections
Modular, Easy-to-Use Design
Management
2
Provides fully redundant power to four devices.
Nine LEDs to provide power, connectivity, and diagnostic information about the
RPS. Also, each supported device has an RPS LED to report the status of the
Redundant Power Supply.
Handy troubleshooting key located on the front of the RPS to quickly diagnose
the meaning of the LEDs.
RPS status information available from HP Stack Manager (Windows 3.1
software shipped with the devices that support the RPS) and HP Interconnect
Manager.
SNMP indication on the RPS connection and the RPS fault condition through the
connected devices.