Operate the power tool exclusively with Stayer accessories. l Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility Product Features company for assistance.
ENGLISH The vibration emission level given in this information sheet Check the tight seating of the application has been measured in accordance with a standardised test tool/accessory. Incorrect or not securely fastened given in EN 60745 and may be used to compare one tool application tools/accessories can come loose during with another.It may be used for a preliminary assessment of operation and pose a hazard.
Deformed, blunt saw blades or saw blades that are manufacturing and testing procedures, repair should be otherwise damaged can break. carried out by an after-sales service centre for Stayer. l When sawing light building materials, observe the After-sales Service and Customer Assistance statutory provisions and the recommendations of the material suppliers.
ENGLISH Stayer Ibérica S.A. 6. EC Declaration of Conformity Area Empresarial de Andalucía - Sector 1 Calle Sierra de Cazorla 7 The undersigned: 28320 Pinto, Madrid (Spain) STAYER IBERICA, S.A. Whit address at: Warranty Calle Sierra de Cazorla, 7 Área Empresarial Andalucía - Sector 1...
Page 7
Área Empresarial Andalucía - Sector I Calle Sierra de Cazorla nº7 C.P: 28320 Pinto (Madrid) SPAIN Email: sales@grupostayer.com Email: info@grupostayer.com www.grupostayer.com...
Need help?
Do you have a question about the MULTI L18 and is the answer not in the manual?
Questions and answers