Savant PAV-SMS2001 Quick Reference Manual

Savant® Music Server with AVB (PAV-SMS2001)
Quick Reference Guide

Box Contents

(1) Savant Music Server with AVB (PAV-SMS2001)
(1) Installation Kit (075-0208-xx)
(1) 5V DC 3A Power Supply (025-0153-xx)
(1) Quick Reference Guide (this document)

Specifications

Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 80% Relative Humidity (non-condensing)
Dimensions and Weight
Height 1.6in (41.5 mm)
Width 8.5in (215.0 mm)
Depth 3.7in (93.3 mm)
Weight Net: 1.4lb (0.64 kg) Shipping: 2.3lb (1.05 kg)
Power
Input Power 5V DC 3A
Max Power 15 Watts
Networking
Supported IEEE 802.1 AVB/TSN switches
Standard IEEE 802.3 Ethernet
Regulatory
FCC Part 15
Safety and
Emissions
RoHS Compliant

Network Configuration

To ensure that the IP Address will not change due to a power outage,
a static IP Address or DHCP reservation should be configured. Savant
recommends using DHCP reservation within the router. By using this
method, static IP Addresses for all devices can be managed from a
single UI, avoiding the need to access devices individually.
NOTE: Setting DHCP reservation varies from router to router. Refer to
the documentation for the router to configure DHCP reservation.

Network Requirements

The PAV-SMS2001 requires a Audio Video Bridging (AVB) network.
Connect all Savant devices to the same local area network (LAN) or
subnet as the host. Savant recommends not implementing any type
of traffic or packet shaping in your network topology for the Savant
devices as this may interfere with performance.
PAV-SMS2001 | 009-1606-00 | 180108
Copyright 2018 Savant Systems, LLC
CE C-Tick
1

Front Panel

Power Status

A B
Green: System has power and is operating
A
Power LED normally.
Off: System is not receiving power
Off: Embedded processor is resetting, or is
powered up, and is booting the embedded
firmware.
Green: Host has established communications
with the embedded system.
Green Blinking: Embedded system is ready, but
no communication has been established with the
host.
Repeat
1s
Red: Host has determined the firmware needs to
be updated, but a problem occurred during the
process that will initiate a reset.
B
Status LED
Red Blinking: Embedded firmware is running, but
has not received a DHCP IP Address.
Repeat
1s
Amber: Host is updating the embedded
firmware.
Amber Blinking: Embedded system has a valid
link-local IP Address and is connecting to the
host.
Repeat
1s

Installation

The PAV-SMS2001 should be installed on a solid, flat, level surface. The
device will fit on a 1U rack shelf. The location should be dry, well
ventilated, and out of direct sunlight.
of 2
For Product Info
.
1s
1s
1s
45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500