Download Print this page
Savant SMS-001A-00 Quick Reference Manual

Savant SMS-001A-00 Quick Reference Manual

Media server single source

Advertisement

Quick Links

Savant® Media Server Single Source
Quick Reference Guide
IMPORTANT! Initial Startup Requirements!
Before Powering on the SMS:
Verify that the SMS is connected to a network router or switch.
Verify that all audio outputs are connected.
Before Configuring the SMS:
Update the SMS-001A to the latest version of firmware.
Refer to the Savant Media Server Single Source Deployment
Guide located on the Savant Community for more information.
Box Contents
(1) Savant Media Server Single Source (SMS-001A-00)
(1) 12V DC Power Supply with Multi-country plugs
(1) RCA Y Adapter Cable - 3.5 mm (1/8 in) Stereo to Dual RCA
(1) Vesa Pattern Mounting Bracket (75 mm and 100 mm)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
10% to 90% Relative Humidity
Humidity
(non-condensing)
Cooling
10 CFM
Maximum BTU
65 BTU/hr
Dimensions and Weight
Dimensions and Weight
Height
2.0 in (51.5 mm)
Width
4.59 in (116.6 mm)
Depth
4.41 in (112 mm)
Weight (Net)
6 lbs (2.7 Kg)
Rack Space
2U (See RCK-5000)
Power
Power
12V DC
Power Supply
120-240V AC 36W
Storage
Storage
Internal
35 GB Solid State Drive
Audio
Audio
Stereo Audio Out
2 Channel
Compliance
Compliance
Safety and Emissions
FCC Part 15 | CE | C-Tick | CCC
RoHS
Compliant
Minimum Supported Release
Minimum Supported Release
Savant OS
da Vinci 6.0.1
SMS-001A-00 | 009-1195-03 | 150316
SMS-001A-00 | 009-1195-03 | 150316
Copyright © 2015 Savant Systems, LLC
Front Panel
USB 3.0
Rear Panel
Power
Connector
Cooling
Vents
Ethernet
Data Rate
LED
Link LED
USB 2.0
Audio Out
Note:
Connections not identified in the diagram above are not functional
within a Savant Configuration/Installation.
1
of 2
Single USB 3.0 port: Used to connect to
external USB hard disk drive for playback of
local content. (HDD not included)
12V DC 36W power connector.
Provides cooling for the internal components.
WARNING! DO NOT block vents in order to
maintain proper cooling.
8-pin RJ-45 10/100/1000 Base-T Gigabit auto-
negotiating Local Area Network (LAN) port
with Link/Activity LEDs.
Green LED indicates link status
Yellow LED indicates Ethernet activity
Off: 10 Mbps data rate
Yellow: 100 Mbps data rate
Off: Ethernet link is not established.
Green Solid: Ethernet link is established.
Green Blinking: Ethernet activity is occurring
Dual USB 2.0 ports: Used to connect to
external USB hard disk drive for playback of
local content. (HDD not included)
3.5 mm (1/8 in) Stereo jack for line level audio
output: Use included RCA Y adapter cable to
connect to Savant SmartAudio chassis or
amplifier.
45 Perseverance Way, Hyannis, MA 02601
savant.com
For Product Info
| 508.683.2500

Advertisement

loading
Need help?

Need help?

Do you have a question about the SMS-001A-00 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Savant SMS-001A-00

  • Page 1 Before Configuring the SMS: Update the SMS-001A to the latest version of firmware. • Refer to the Savant Media Server Single Source Deployment Guide located on the Savant Community for more information. Box Contents (1) Savant Media Server Single Source (SMS-001A-00) (1) 12V DC Power Supply with Multi-country plugs (1) RCA Y Adapter Cable - 3.5 mm (1/8 in) Stereo to Dual RCA...
  • Page 2 Audio Connections The analog audio output of the SMS-001A is typically connected to the audio source input of a Savant Audio Matrix and Controller such Additional Information as the SSA-4004 or SSA-4012. Refer to the following documents located on the Savant Community for additional information.