Table of Contents
Advertisement
Consult with the dealer of the peripherals for correct installation.
Mount the Camera
1. Use the supplied wrench to remove the dome cover
1
SW_NOPEN
OUTPUT (Max. 1A, 24VDC or 0.5A, 125VAC)
2
SW_COMMON OUTPUT (open from SW_OPEN at initial state)
3
DI+
INPUT (Max. 50mA, 12VDC)
4
DI-
INPUT (Initial state of DI is low)
- 5 -
(close with SW_OPEN when set DO to ON)
Advertisement
Table of Contents
