Start Of Operation; Installing The Module Body - Walther Systemtechnik WMV-03-K-14-14-01 Installation Manual

5

Start of Operation

Installing the Module Body

Insert the four M6 screws in the provided through-bores and screw to the basic board.
Installation Manual WMV-BA-10
WARNING
Hazard from contact or inhalation of toxic fluids, gases, mist, vapors or
dust
Strictly follow the safety data sheets of the employed media.
The operator company is responsible for providing the required personal protective
equipment which has to be worn. All rules and regulations for workplace safety,
accident prevention and environmental protection will be followed for the location,
and a yearly safety training will be conducted.
1
Figure 4 – Module body
5 Start of Operation
1
EN
Page 13 of 19