Advertisement
Putting on the harness
3
C
-
Place the harness over both shoulders so that the hip
pad (C/3) is located on your right hand side.
-
Adjust the harness until the chest plate (C/4) Þ ts across your
chest.
Balancing the brushcutter
E
-
Fill the fuel tank and attach the brushcutter to the Þ xing
hook (E/5) located on the waist pad.
-
5 boreholes are provided for the correct personal balan -cing
of the brushcutter .
G
14
4
D
-
Adjust the height of the hip pad means by of the chest
strap until the Þ xing hook is located about one hand's width
above the hip bone.
-
To open the harness detach the chest plates. The harness
and the brushcutter can then easily and quickly be remo-
ved.
5
F
-
To remove the brushcutter, Þ rst depress the lock (F/6)
and then detatch the brushcutter from the Þ xing hook.
-
The ground clearance will depend on the kind of cutting
tool selected.
-
When using the trimmer head on a level terrain, the trimmer
head should touch the ground lightly without the user
having to hold the unit.
-
In difÞ cult terrain or when using the steel bush cutter or
8-tooth eddy blades the brushcutter should balance about
30 cm above the ground without the user having to hold
the unit.
6
Advertisement
