Table of Contents
Advertisement
5
Setup
5.1
Installation
Place the device only in the location which has the following properties:
- Stationary
- Shock-free
- In the protected room, for example switch cabinet
- Dust-free and dry environment
- Even and non-slip support
Note
If you embed the device, observe the minimum bending radii of the cables and lines.
The mounting clearance must be at least 150 mm from the rear wall.
Do not cover the lateral ventilation slots in the door, ensure sufficient air circulation.
12
Manual
Issue 1.4
ibaOfficeline SAS
Advertisement
Table of Contents
