Advertisement
Quick Links
Service
STF XP T3
10941683 beige
10941684 grey
10956433 beige - demo
Legal Manufacturer
Sivantos GmbH
Henri-Dunant-Strasse 100
91058 Erlangen, Germany
BTE instruments utilize electrostatic sensitive devices
(ESD) which are very sensitive to static charges and
may be destroyed by such charges. All work on open
hearing instruments therefore is recommended at
workplaces according to ESD regulations to prevent
the accumulation of static charges.
Tools
Tools usually used for servicing and repairing hearing
instruments.
http://www.am-hearing.com
Page:
1/9
STF XP T3
Reference number:
Replaces edition:
D00158336
2016-10-06
© Sivantos GmbH. All rights reserved.
Edition:
2018-10-29
Advertisement
Related Manuals for A&M STF XP T3
Summary of Contents for A&M STF XP T3
- Page 1 Service STF XP T3 BTE instruments utilize electrostatic sensitive devices (ESD) which are very sensitive to static charges and may be destroyed by such charges. All work on open hearing instruments therefore is recommended at workplaces according to ESD regulations to prevent the accumulation of static charges.
- Page 2 STF XP T3 Order No. Description Instrument 10959939 SERV PACK PUNCH TAILOR 10940057 SERV EARHOOK H3410 10942811 SERV HSG SET STF XP BG 10942812 SERV HSG SET STF XP GR 10600047 TOOL REMOVAL H2770 BLU Legal Manufacturer http://www.am-hearing.com Reference number:...
- Page 3 STF XP T3 Legal Manufacturer http://www.am-hearing.com Reference number: Replaces edition: Edition: Sivantos GmbH D00158336 2016-10-06 2018-10-29 Henri-Dunant-Strasse 100 91058 Erlangen, Germany Page: © Sivantos GmbH. All rights reserved.
- Page 4 STF XP T3 Order No. Description Amplifier 10942574 SERV NT BASE STF XP T3 Accessories 10420865 DOUBLETIP REFILL 10/12MM NEUTRAL 10420863 DOUBLETIP REFILL 8/10MM NEUT 1 10937494 ACCESSORY COMFORT COUPLING SET 10674683 INDICATOR CLIP SET 10940334 SERV EARHOOK SMALL H3420...
- Page 5 STF XP T3 Service Instructions Whenever the instrument housing is opened or exchanged, it is important to follow these instructions when assembling the instrument. Required tools: Tool Removal (order number: 10600047), tweezers 1. There shall be a gap between the receiver box and the frame wing.
- Page 6 STF XP T3 3. The rear side of the NT base shall assemble into the bottom housing. Use the rib at the bottom housing and a slot at the frame as a reference point to insert the NT base. Fig. 5 4.
- Page 7 STF XP T3 6. Push down the rocker switch to ensure that the NT base is fully seated in the bottom housing as shown in Fig .10. Fig. 10 7. The push button shall assemble into the top housing according to the correct orientation (reference point in red circle in Fig.
- Page 8 STF XP T3 8. Assemble the top housing into the bottom housing and the NT base according to the sequence as shown in Fig. 15. Fig. 15 9. Assemble the battery door. 10. Assemble the axle pins according to the sequence as shown in Fig. 16.
- Page 9 STF XP T3 12. The ear hook shall touch the frame (Fig. 18) and the ear hook rib shall not be damaged (Fig. 19). Fig. 18 Fig. 19 Legal Manufacturer http://www.am-hearing.com Reference number: Replaces edition: Edition: Sivantos GmbH D00158336 2016-10-06...