EDGE ED-1 Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
EDGE ED-1 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. Before using the device, check the regulations regarding the frequency allocation in your country or region.
EDGE ED-1 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
EDGE ED-1 Description of the Device The EDGE ED-1 is an antenna distributor that can be used with the EDGE wireless handheld system. The EDGE is suitable for voice transmission. Features ● Power supply: DC 12 V, 5 A ●...
EDGE ED-1 Back Fig. 02 02) A1–A4, BNC connector OUT Use these connectors to connect the EDGE EHS-1 receivers. Each high-frequency output can supply power to the receiver. 03) RF A, BNC connector OUT Use this connector to connect another ED-1, in order to create 8-channel diversity high-frequency output.
EDGE ED-1 Installation Remove all packing materials from the EDGE ED-1. Check if all foam and plastic padding is removed. Secure the equipment into a 19" rack if preferred. Connect the device to a power outlet with the supplied DC power adapter. Connect all cables.
EDGE ED-1 2 x EDGE ED-1 Fig. 06 Setup and Operation Follow the directions below, as they pertain to your preferred operation mode. Before using the device, check the regulations regarding the frequency allocation in your country or region. Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
Fig. 07 Maintenance The DAP Audio EDGE ED-1 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
Approval The DAP Audio EDGE ED-1 is a Class 2 wireless audio device (Commission Decision 2000/299/EC). Frequency range: 470–980 MHz (-3 dB) Exclusion of liability The frequency ranges available for wireless microphones differ per country and region. Consult the respective national and/or regional authorities as licensing or specific restrictions may apply for the use of the device.
Page 13
EDGE ED-1 Spain Secretaría de Estado para el Avance Digital www.mineco.gob.es France Agence Nationale des Fréquences www.anfr.fr Croatia Regulatory Authority for Network Industries www.hakom.hr Italy Istituto Superiore delle Comunicazioni e delle www.isticom.it Tecnologie dell’Informazione Cyprus Department of Electronic Communications www.mcw.gov.cy...
EDGE ED-1 Product Specifications Model: DAP Audio EDGE ED-1 Power supply: DC 12 V, 5 A Power consumption: 200 mA Maximum power consumption: Through ANT RF IN A/ANT RF IN B power 12 V, 500 mA to antenna distributor: Through A1 to A4 power to receiver:...
Need help?
Do you have a question about the EDGE ED-1 and is the answer not in the manual?
Questions and answers