wallas SafeFlame 87D Instructions

87D
Figure 1: Diesel stove-oven SafeFlame 87D
Operation
SafeFlame 87D is a safe
diesel stove-oven with no
open flame. The stove-oven
consists of the combination
Cut-out for the
installation
The minimum cut-out for the
oven is 500 x 530 x 540 mm
(figure 2). The bottom of the
cut-out shall have openings
for cooling air with a
minimum area of 100 cm
Figure 2: Cut-out for installation of 87D.
www.busse-yachtshop.de | info@busse-yachtshop.de
of diesel oven SafeFlame
86D and diesel stove
SafeFlame 85DP. The
technical details, instructions
and servicing
The cut-out shall be made of
fireproof material or lined
with fireproof material. The
stove-oven is attached to the
cut-out in the same way as
oven 86D.
2
.
1 / ENGLISH
Content of the package
1 pc 87D diesel stove-oven
1 pc Baking sheet
1 pc Baking tray
1 pc Auxiliary bag
2 x 4 m Power cord
4 m Fuel hose with a filter
2 pcs Mounting pieces (front and rear)
2 pcs Lifting handle of stove-oven
Content of the auxiliary bag:
4 pcs 5 x 16 standard screw
1 pc Hose clamp
1 pc Fuse box bag
recommendations given for
85DP apply to the stove
element, and instructions for
86D apply to the oven
element.
The installation cut-
out of the stove-
oven must have a
replacement air
opening of at least
100 cm 2 .
Cooling air openings
490049