Table of Contents
Advertisement
1.1
DESCRIPTION
The Vibraswitch, Model EURO 366G, is designed to protect rotating, reciprocating, or similar equipment against serious damage from
malfunctions that can be detected as an increase in vibration. A reset and holding coil is provided, in the DC/AC voltage as specified so
that accidental shutdowns on start can be prevented.
The Vibraswitch, Model EURO 366G, may be used in conjunction with the Vibraswitch Monitor, Model 563A. The Monitor is a solid-
state electronic system designed to "sort-out" false signals received by the Vibraswitch so that Alarm and/or Shutdown of the operating
machine will not result from false, transient disturbances. Please note that the Model 563A does not have CE or ATEX certification at
this time.
1.2
MODEL IDENTIFICATION
Specify and order instrument models in accordance with the description and variations listed in each table.
ORDERING INFORMATION:
KEY MODEL NUMBER
SWITCH CONTACTS - SEE TABLE 1
REMOTE RESET - SEE TABLE 2
ENCLOSURE TYPE - SEE TABLE 3
ENCLOSURE FINISH - SEE TABLE 4
SWITCH RATING - SEE TABLE 5
ENCLOSURE CONDUIT ENTRANCES - SEE TABLE 6
SPACE HEATER - SEE TABLE 7
Model Number
EURO 366G
DESCRIPTION
Table A - Key Model Number
Electric Vibration Detector. Cast Iron Enclosure
Explosion Proof ATEX
Contacts actuate when Setpoint is exceeded.
Range: from 0 to 4,5G
SECTION I
EURO 366G
A
Description
II 2GD Ex d IIC T6 tD A21 IP66 T85°C
Page 4
8
H
2
A
X
X
909GF299
Advertisement
Table of Contents
