Advertisement
Please read these instructions carefully before use and retain for future
reference.
This floodlight must be installed by a qualified electrician in accordance with current
building and IET wiring regulations (BS7671).
IMPORTANT SAFETY INFORMATION
•
This product must be connected to Earth.
•
The front of this floodlight is made of tempered glass, which cannot be replaced.
Please take care while installing. If it gets damaged, the floodlight must be
replaced and disposed of.
•
LED lamps are extremely bright. To avoid possible damage to the eyes, do not
stare into an LED beam.
•
In use, avoid touching any external surface of the floodlight, due to the possibility
of high temperatures.
•
If the mains cord lead of this floodlight is damaged, it shall be replaced by the
Manufacturer or its service agent, or a similarly qualified person to avoid a hazard.
•
The floodlight can be mounted on normally flammable surfaces.
•
The floodlight is suitable for use in an ambient temperature between -30°C and
+45°C.
•
Terminal block not included. Installation may require advice from a qualified
person.
POSITIONING
•
This floodlight is suitable for outdoor lighting applications, for domestic use only.
•
Do not use in areas where an explosive or chemical atmosphere may exist. Do not
use in areas where ventilation is restricted.
•
It is suitable for mounting on plasterboard, wood or masonry surfaces. Highly
flammable surfaces such as plastic or polystyrene must not be used.
•
Do not install on damp or conductive surfaces such as metal. It should be placed
away from any flammable materials.
•
Before drilling any fixing holes, check that there are no hidden obstructions behind
the mounting surface such as pipes or cables.
•
The recommended height for installation of the floodlight is between 0.5 and 3
metres.
•
Ensure that there is space around the floodlight to allow adequate circulation of air.
•
Orientation of the floodlight is important as shown below:
2
Advertisement
