Thank you for purchasing the KMC50 Media Center. We recommend read- ing through the entire manual for detailed instructions on how to install and ance could void the user’s authority to operate the equipment.
KMC50 Installation Overview 1. Main Harness 2. USB Port 3. Antenna Input 4. Remote Port 5. AUX Input 6. Front RCA Output 7. Rear RCA Output 8. Sub RCA Output 5.5” 9. Zone 2 RCA Output Main Harness 1- Red, Switched 12V+...
OPERATION The button layout below will give you a quick overview of the button functionality. KMC50 Settings MENU To enter the Settings Menu : Hold the MENU (3) button for 2 seconds. BUTTONS: Press the Menu (3) button to scroll between menu items and rotate the 1 - Source knob (7) to adjust the Menu setting.
Page 5
OPERATION Sources Sources Cont. To change any of the sources, press the Source (1) button on the KMC50. USB Source: Function: How To: FM Source: Function: How To: Previous Track: Press the Seek Down (5) button once. Seek Up: Press the Seek Up (7) button once.
Page 6
Treble: Rotate the knob left and right to adjust the Treble. Pressing Menu (3) When the KMC50 is not paired with a device, “In Pairing Mode” will appear on the screen until a device is paired. Press and Hold Favorites (2) button for 2 seconds to manually disconnect from a paired device and reenter Balance: Rotate the knob left and right to adjust the Balance.
Electronics Limited Warranty (including KICKER Accessories) When purchased from an Authorized KICKER Dealer, CPS warrants this product to be free from defects in material and workmanship under normal use for a period of ONE (1) YEAR from date of original purchase with receipt. If this product is identified as “Refurbished” or “B Goods”, the warranty is limited to a period of THREE (3) MONTHS from the date of original purchase.
Page 8
KMC50 Owner’s Manual IC WARNING This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the KMC50 and is the answer not in the manual?
Questions and answers