Transport And Handling - CLIMAVENETA ACCURATE AXO Installation Manual

TRANSPORT AND HANDLING

Move the air-conditioner, which must not be reclined or tipped
over, nor exposed to the elements, as near as possible to the site
of installation before removing the packaging and the pallet.
The units can be lifted:
- using a forklift, sliding the forks through the openings in the
pallet;
- using fabric slings underneath the unit, making sure that when
the slings are in tension these do not apply pressure on the
top edges.
The air-conditioner must be stored indoors, preferably in its own
packaging, and protected against excessive humidity (<85% RH)
and temperature (< 50°C).
07 10
L mm 660
H mm 2150
P mm 560
The symbols shown on the packaging are compliant with the ISO
7000 standard; the meaning of the symbols is shown in the table.
FRAGILE: handle with care.
KEEP DRY: indicates that the packaged unit
must be kept in a dry place.
CENTRE OF GRAVITY: indicates the
centre of gravity of the packaged unit.
KEEP AWAY FROM HEAT: indicates
that the packaged unit must be kept
away from sources of heat.
RECEIVING THE UNIT
Check, upon delivery, that the air-conditioner is intact and in per-
fect condition; immediately notify the carrier in writing of any
damage that may be due to transport.
In particular, check that the panel where the user terminal is fit-
ted has not been damaged.
If the side panels have been damaged during transport, they must
be replaced before installing the unit.
10
English 01/07
15 18 20 26
1060
29 39 30 40
1610
2185
850
THIS SIDE UP: indicates the correct position
of the packaged unit.
TEMPERATURE LIMITS: indicates the
temperature limits for storing and handling the
packaged unit.
USE NO HOOKS: indicates that hooks cannot
be used to handle or lift the
packaged unit.
DO NOT STACK the packages.
I A
L
H
P
50 55 60 70
2160
ACCURATE AX* - AW*