3Com OfficeConnect 3CRWE41196 User Manual page 47

Saving a Profile
To set up a profile (once the Service Area Name/SSID and Encryption
settings have been configured in the Access Point):
1 Enter a Profile Name (up to 25 alphanumeric characters) and then click
Save Profile.
2 Your browser will then prompt you to enter a file name and folder
location in which to save the profile. Once the profile has been saved it
can be copied on to another PC and imported into the 3Com Wireless
Network Adapter.
For instructions on how to import a profile, refer to the User Guide that
accompanies your 3Com Wireless Network Adapter(s).
If, once the profile is imported, the Wireless Network Adapter cannot
connect to the Access Point, check that:
the adapter is within range of the Access Point
■
if Connection Control has been enabled in the Access Point, the MAC
address of the Wireless Network Adapter must be included in the list of
authorised Wireless PCs.
Importing a Profile
You can import a profile that has already been saved.
1 Click Browse and navigate to the folder where you have saved the profile
on your admin computer.
2 Select the Profile you want to import and click Load Profile.
Only the Service Area Name and WEP settings will be imported from the
profile.
Wireless Settings 47