Reboot and
Shutdown
Reset to Factory
Settings
The 3Com Email Firewall can be safely rebooted or shut down from the
System Mgmt -> Reboot and Shutdown screen. Before shutting down,
remove any media from the floppy and CDROM drives.
Click Reboot now to shutdown the system and reboot.
Click Shutdown now to shutdown the system completely.
Select System Mgmt -> Reset to Factory Settings from the menu to revert
your 3Com Email Firewall back to its factory default settings.
CAUTION: All existing configuration settings and data will be lost if you
reset to factory default settings. Ensure that you perform a backup of
your system if you wish to restore your configuration and data. Also
ensure that your system is connected to a UPS (Uninterruptable Power
Supply) to prevent damage in the event of a power failure duing this
procedure.
Click the Restore to Factory Settings now button to continue. The system
must be rebooted when the procedure is complete. After rebooting, you
must reinstall the system using the instructions in the
that came with your 3Com Email Firewall.
Reboot and Shutdown
Installation Guide
113