Error Messages - Icom MA-510TR Instruction Manual

■ Error messages

An error message is displayed when a malfunction occurs that has an error message
programmed for it.
Message contents
GPS malfunction No
GPS data
RX malfunction No
RCV
RX malfunction CH A
noise level
RX malfunction CH B
noise level
TX malfunction No TX
power
TX malfunction
Continuous TX
Antenna malfunction
High VSWR
Antenna malfunction
Open or Short
Displayed when no GPS data is received for 60 seconds.
Displayed when the transponder receive circuit has failed.
Displayed when excessively strong atmospheric noise, or
noise signals from other navigation equipment, are received on
Channel A.
Displayed when excessively strong atmospheric noise, or
noise signals from other navigation equipment, are received on
Channel B.
Displayed when no RF power is output, or the transmit circuit has
failed.
Displayed when the protective circuit cuts off the AIS signal after
1 second of continuous transmission.
Displayed when the high VSWR* is detected (the antenna is
mismatched) for 5 minutes.
*Voltage Standing Wave Ratio
Displayed when the antenna is open or shorted.
MAINTENANCE
Description
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
48