MN006437A01-AB
Chapter 5: Alignment
2 Click the "PTT" button or press the "SPACE" bar of the computer's keyboard, the radio will start
to transmit on the center frequency channel.
3 Set the value to get the desired frequency according to the following ways:
•
Dragging the slide bar
•
Clicking the arrow ( / ) buttons
•
Pressing the left/right arrow key of the computer's keyboard
•
Entering the value ("0000" - "FFFF") in the "Current Data" box from the computer's keyboard.
4 After getting the desired frequency, click the "PTT" button or press the "SPACE" bar to stop
transmitting.
5 Click the "OK" button to finish the frequency alignment and save the data.
5.4.4
TX Power
This parameter is to align the "High Power," "Low3 Power," "Low2 Power" and "Low1 Power" for the
selected channel.
Procedure:
1 Click the "TX Power (High Pwr / Low3 Pwr / Low2 Pwr / Low1 Pwr)" button to open the "TX
Power Alignment" window.
20