Alternate Mode malletKAT User Manual page 89

Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
UNIVERSAL ID
Parameters = Universal ID, 01-127
The "Individual Instrument ID" for the malletKAT can be assigned at this screen. This setting is used to allow
external devices to selectively send data dump information to the malletKAT. This number is really useful if you
have more than one malletKAT. If not, leave it set to UNIVERSAL ID. Data dump information that is meant for a
malletKAT with a different ID than assigned at this screen will not be accepted by the malletKAT. (except if set at
Universal ID, which accepts all).
Global Auxiliary Shortcut #41
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
MIDI IN PROGRAM CHANGE SOUND MAP
Parameters = SETUPS MAP, GENERAL MIDI MAP
When the malletKAT receives a Program Change Command, this data can be routed to change the Program
within the Active Setup (GENERAL MIDI MAP) or it can change the SETUP ITSELF (SETUP MAP).
If you are using a malletKAT WS in a Multi Mode Configuration (more than one sound at once) or if you are using
the internal sound source for another controller, using the setting GENERAL MIDI MAP sends program changes
to any of the 16 MIDI channels when receiving Program Change Data from an External Source from the MIDI IN.
Global Auxiliary Shortcut #02
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
MIDI IN to MIDI OUT MERGE
Parameters = ON / OFF
MIDI data coming into the MIDI IN of the malletKAT may be passed through to the MIDI OUT if MIDI Merge is set
to ON.
Global Auxiliary Shortcut #44
malletKAT Express
Auxiliary Editing Screens require pressing the Edit Footswitch and Sustain 1 pedal at the same time (See Section
4.1.1(https://alternatemode.com/online-docs/malletkat/#malletkat-express-accessing-editing-functions)
)
89 / 109
malletKAT User Manual (ver.07-17-18)