Multiple Network Management Modes; Complete Network Management Information Interworking Schemes; Easy Installation - Huawei OptiX RTN 600 Product Description

2.10 Multiple Network Management Modes

You can perform management in the following ways:
Directly connect an iManager T2000 Web local craft terminal (Web LCT) to the
OptiX RTN 600 to manage the NE.
Connect a Web LCT to an NE in the network, to manage any OptiX RTN 600.
Use the iManager T2000 to manage all the OptiX RTN 600 and other Huawei
optical transmission systems in the network.
Use the simple network management protocol (SNMP) agent to query alarms
and performance events.
2.11 Complete Network Management Information
Interworking Schemes
The OptiX RTN 600 supports the interworking of NM information in both the physical
layer and the network layer.
In the physical layer, the OptiX RTN 600 uses the following:
A self-defined DCC byte in the PDH microwave frame to carry the NM
information.
The D1 to D3 bytes in the SDH microwave frame and the SDH frame to carry the
NM information.
The D4 to D12 bytes in the SDH microwave frame and the SDH frame to carry
the NM information.
The D1 to D12 bytes in the SDH microwave frame and the SDH frame to carry
the NM information.
In the network layer, the OptiX RTN 600 uses the following:
HW ECC (Huawei's private protocol) to carry the NM information.
IP over DCC to carry the NM information.
OSI over DCC to carry the NM information.

2.12 Easy Installation

The IDU supports various mounting methods. It can be installed:
- In a 300 mm ETSI cabinet.
- In a 600 mm ETSI cabinet.
- In a 450 mm 19-inch cabinet.
- In a 600 mm 19-inch cabinet.
- In an open cabinet.
- On the wall.
Commercial in Confidence
Product Description
OptiX RTN 600
Page 7 of 44