Powered Swivel Seat - Acorn 180 User Manual

to enter and exit the stairlift.
When the unit reaches the upper end of the track, it will stop automatically.
Make sure the seat is locked into position
It is important that the seatbelt is undone
ONLY when the seat has fully swivelled and
it is safe to leave the stairlift.
the direction controller on the arm rest and press again in the
UP direction. The seat will begin to swivel round automatically.
It is important that the seatbelt is undone ONLY when
the seat has fully swivelled and it is safe to leave the stairlift.
When the lift reaches or leaves the programmed hinge zone, the Stairlift will stop
and the powered hinge will be automatically raised or lowered. This will allow the
user to operate the hinge whilst in a line of sight. At the bottom of the stairs, once
top of charge point. Disembark/mount the lift at the bottom of the stairs.
Before operating the powered hinge, ensure that the area is clear
14
9000_AC_TC_Combined_Multilingual 180 user manual_1220.pdf 13 9000_AC_TC_Combined_Multilingual 180 user manual_1220.pdf 13
STAIRLIFT OPERATION
SWIVEL SEAT
To turn the seat, depress and
hold down the seat swivel lever
at the side of the seat pad.
This will then allow the seat to
be rotated to face the staircase
landing. The seat will lock
in position at 45º and 80º.

POWERED SWIVEL SEAT

POWERED HINGE
Acorn Stairlifts User Manual
80 swivel is 45 swivel is
used on a used on a
standard size narrow size
landing. landing.
LANDING
LANDING
1
2/10/2021 11:18:01 AM 2/10/2021 11:18:01 AM