3Com SuperStack 3 3C16477 User Manual
3Com SuperStack 3 3C16477 User Manual

3Com SuperStack 3 3C16477 User Manual

8 port gigabit switch 10base-t/100base-tx/1000base-t

Advertisement

®
SuperStack
10BASE-T/100BASE-TX/1000BASE-T (3C16477) User Guide
DUA1647-7AAA01
1
4
5
I
NTRODUCTION
®
The SuperStack
3 Baseline 8 Port Gigabit Switch is a versatile,
easy-to-use switch. It is ideal for users who want the high-speed
performance of 10/100/1000 switching but do not need
sophisticated management capabilities. The Baseline 8 Port
Gigabit Switch is shipped ready for use. No configuration is
necessary.
The Baseline 8 Port Gigabit Switch can be rack-mounted or free
standing.
The Baseline 8 Port Gigabit Switch includes:
One power cord
One mounting kit
Four standard height, self-adhesive rubber pads
The Switch is powered from the AC mains supply.
The Baseline 8 Port Gigabit Switch provides high performance
switched connections to 10 Mbps, 100 Mbps, and 1000 Mbps
hubs, switches, servers and workstations that need a dedicated
switched link. The following figure illustrates one possible
configuration. The Baseline 8 Port Gigabit Switch has 8 shielded
RJ-45, 10/100/1000 Mbps auto-negotiating ports on the front
panel. Each 10/100/1000 Mbps port automatically determines
the speed, duplex mode, and MDIX mode of the connected
equipment and provides a suitable switched connection. The
10/100 Mbps connections on these 1000BASE-T ports operate in
half or full duplex mode while the 1000 Mbps connections
operate in full duplex mode.
3 Baseline 8 Port Gigabit Switch
8
The Baseline 8 Port Gigabit Switch supports a maximum of 8192
MAC adddresses.
Baseline Dual Speed Hub
with 10/100 connection
Servers with
1000Mbps
connections
Baseline 10/100 Switch plus Gigabit
1
Baseline 8 Port Gigabit Switch
1000Mbps
connections

Advertisement

Table of Contents
loading

Summary of Contents for 3Com SuperStack 3 3C16477

  • Page 1 ® SuperStack 3 Baseline 8 Port Gigabit Switch 10BASE-T/100BASE-TX/1000BASE-T (3C16477) User Guide DUA1647-7AAA01 NTRODUCTION ® The SuperStack 3 Baseline 8 Port Gigabit Switch is a versatile, easy-to-use switch. It is ideal for users who want the high-speed performance of 10/100/1000 switching but do not need sophisticated management capabilities.
  • Page 2: Front Panel

    Switch will operate in half duplex mode (only for 10BASE-T and 100BASE-TX). In such a configuration, you may notice some degradation of network performance. 3Com recommends that you use devices that are capable of auto-negotiation (and that you ensure that auto-negotiation is enabled, if it is a configurable option).
  • Page 3: Rear Panel Connections

    Water or moisture cannot enter the case of the unit. Air flow around the unit and through the vents in the side of the case is not restricted (3Com recommends that you provide a minimum of 25 mm (1 in.) clearance).
  • Page 4: Problem Solving

    Ensure that the power input to your system is clean and free from sags and surges to avoid unforeseen network outages. 3Com recommends that you install power conditioning, especially in areas prone to black outs, power dips and electrical storms.
  • Page 5 AFETY NFORMATION Please read the following safety information carefully before installing the Baseline 8 Port Gigabit Switch. WARNING: Installation and removal of the unit must be carried out by qualified personnel only. If installing the Switch unit in a stack with SuperStack II or SuperStack 3 Hub units, the Baseline 8 Port Gigabit Switch unit must be installed below the narrower Hub units.
  • Page 6: Fcc Statement

    ECHNICAL NFORMATION Related Standards The SuperStack 3 Baseline 8 Port Gigabit Switch has been designed to the following standards: Functional ISO 8802-3, IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE 802.3ab (Gigabit Ethernet), IEEE 802.1D (Bridging) Safety UL 60950, EN 60950, CSA 22.2 #60950, IEC 60950 EMC Emissions EN 55022 Class A, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, AS/NZS 3548 Class A,...
  • Page 7 Browse the 3Com web site on http://www.3com.com If you require additional assistance, contact your network supplier. Many suppliers are authorized 3Com service partners who are qualified to provide a variety of services, including network planning, installation, hardware maintenance, application training, and support services.
  • Page 8: Product Registration

    Improving our environmental record on a continual basis Product Registration You can now register your SuperStack 3 Baseline 8 Port Gigabit Switch on the 3Com web site: http://support.3com.com/registration/frontpg.pl Documentation Feedback Your suggestions are very important to us. They will help make our documentation more useful to you. Please e-mail comments about this document to 3Com at: pddtechpubs_comments@3Com.com...

This manual is also suitable for:

3c16477 - baseline 10/100/1000 switchSuperstack 3 baseline 3c16477

Table of Contents