Advertisement
Quick Links
PEARL HI-HAT STAND
H-820W
Instruction Manual
Congratulations on your purchase!
To get optimum performance of your H-820W Hi-Hat Stand,
please read this Instruction Manual before playing.
Pull Rod
Upper Tube
Base
Hi-Hat Clutch
Hi-Hat Cup
Stop Lock
Wing Bolt
Wing Bolt
Spring Tension Adjustment Dial
Reversible
Footboard
Radius Rod
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Pearl H-820W
Summary of Contents for Pearl H-820W
- Page 1 PEARL HI-HAT STAND H-820W Instruction Manual Congratulations on your purchase! To get optimum performance of your H-820W Hi-Hat Stand, please read this Instruction Manual before playing. Hi-Hat Clutch Pull Rod Hi-Hat Cup Upper Tube Stop Lock Wing Bolt Wing Bolt...
- Page 2 Footboard Attachment Upper Section Assembly Squeeze the Radius Rods together and insert the ends into Thread the Upper Pull Rod into the Connector as shown in (Fig. 3-A). the holes in the Support Casting as shown in the diagram. Loosen the Key Bolt on the Stop Lock until the Stop Lock Stand the hi-hat base vertically by adjusting the width of the slides freely on the Upper Tube.
- Page 3 Hi-hat Cup Tilt Adjustment Caution Turn the Knurled Knob to tilt the bottom cymbal to help prevent "air lock" between the cymbals (Fig. 4). Periodically check all Allen Screws for tightness and tighten them with the provided Allen Wrenches as needed.
Need help?
Do you have a question about the H-820W and is the answer not in the manual?
Questions and answers