Advertisement
• Only connect to a properly grounded outlet in accordance with local codes,
the current CSA C22.0 Canadian Electrical codes or for USA installations, and
follow local codes and the National Electric code ANSI/NFPA No. 70.
• Do not insert or allow objects to enter any ventilation opening as this may
cause an electrical shock, fire or damage to the heater.
• To prevent a possible fire, do not block air intakes in any manner.
• Do not use this appliance in areas where gasoline, paint or any flammable
liquids are used or stored. This appliance should not be used as a drying rack
for clothing.
• Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power strip.
• Do not use this heater with missing, damaged, or broken legs.
• Keep your electric heater clean and the filter free of dust.
• Do not plug any other electrical appliance into the same circuit. Blown fuses,
tripped circuits and fire hazards may occur.
• Do not use water or liquids to clean your electric heater.
ALWAYS OBSERVE THESE SAFETY PRECAUTIONS WHEN OPERATING YOUR
ELECTRIC HEATER
IMPORTANT: Read all instructions and warnings carefully before
installation and use. Failure to follow these instructions may result
in possible electric shock, injury to persons, fire hazard and will
void the warranty.
"SAVE THESE INSTRUCTIONS"
newair.com
5
Advertisement
