Handing Instructions - Yale 7000 Series Parts Manual

Handing Instructions

Handing
Left Hand Reverse: Hinges on left, opens outward . For handed devices, specify LHR .
Right Hand Reverse: Hinges on right, opens outward . For handed devices, specify RHR .
Note: Doors with Panic-Exit and Fire Exit hardware must open out . Therefore, hands must be reverse bevel .
HINGE
JAMB
Rim Devices
7100(F), 7150(F), 7200(F) Series
These devices are non-handed .
Vertical Rod Devices, Surface
and Concealed
7110(F), 7120(F), 7160(F), 7170(F),
7210(F), 7220 Series
Remove four screws and vertical lifter
assembly . Turn device to opposite (180
degrees) orientation, insert lifter assembly
and reinstall screws .
NOTE: Lifter must fit under lift block
as shown .
Copyright © 2002-2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
66
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress
Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
42210_Yale_7000_PM.indd 66 42210_Yale_7000_PM.indd 66
PUSH SIDE
LEFT HAND
REVERSE
BEVEL DOOR
PULL SIDE
PUSH SIDE
STRIKE
JAMB
PULL SIDE
LHR
RHR Door
RIGHTHAND
REVERSE
BEVEL DOOR
PUSH SIDE
STRIKE HINGE
JAMB JAMB
PULL SIDE
RHR
Device Side
RHR DEVICE
VERTICAL LIFTER
VERTICAL LIFTER
ASSEMBLY
LHR Door
LHR DEVICE
ASSEMBLY
7000 Series Parts Manual
10/6/20 3:05 PM 10/6/20 3:05 PM