HoMedics SOUNSPA SUNRISE Instruction Manual And Warranty Information page 10

SETTING THE NIGHT-LIGHT
Customize your SoundSpa
10 brightness levels. Once you select your preferred night-light color and brightness, SoundSpa
Sunrise will automatically return to your light setting every time you short press the touch key.
Want to change the color or brightness? You can always update your settings through the night-
light setup process below.
1. To set up the night-light, first make sure sleep sounds are turned off. If needed, long press
the touch key to turn them off.
2. Turn on the light by short pressing the touch key on the top of the unit.
3. Set the night-light color and brightness in the light mode menu. To enter the light mode
menu, long press the mode M button on the bottom of the unit. The LED screen will display the
light color number.
4. Short press the mode M button to change colors until you reach your desired color setting.
5. Once you have chosen the color setting, press the + or – buttons to increase or decrease the
brightness of the light. The LED screen will display the current brightness level.
6. The chosen light color and brightness is now set and will be maintained the next time the
night-light is turned on.
NOTE: The light menu can only be reached when the light is on and the sleep sounds are off.
The M button will not allow you to enter the light menu if the sleep sounds are also on, or if the
unit is off.
Sunrise night-light by choosing from 9 different color options and
®
AM
PM
1 0