Download Print this page

Reference Documents - Honeywell KXP2290 Alignment Procedure

Diversity mode s transponder
Hide thumbs Also See for KXP2290:

Advertisement

Reference Documents:

The following documents apply to the KXP2290 Diversity Mode S Transponder.
1. Minimum Performance Specification (MPS),
KXP2290 004-02279-4000.
2. Product Structure Diagram, KXP2290 000-02000-0000.
3. KXP2290 Software Design Document, 721-00894-XXXX.
4. RTCA DO-181C Minimum Operational Performance Standards for
the Air Traffic Control Radar Beacon System/Mode Select
Airborne Equipment.
5. System Requirements Document, KXP2290 701-00731-XXXX.
Measurement Reference and Required Equipment List:
Measurement Reference:
Throughout this document, unless otherwise noted, receiver and transmitter power levels are
measured at the antenna end of a nominal 2dB loss coaxial cable.
1.
KXP2290 Manual Test Panel:
2.
IFR ATC-1400A, (S-1403DL with MLD) or-1403DL without MLD)
DME/Transponder test set.
3.
Oscilloscope: Tektronix TDS 320, 350, 380, 3054B, 520, 540C
or equivalent.
4.
Digital multi meter, 3 ½ digits: Fluke 8010A or equivalent.
5.
Power Supply, 0 to 30 Volts, 5 Amps or equivalent.
6.
PC pentium_90, or better (Windows 95/98/ME/2000/ XP is not
acceptable).
7.
KXP2290 Diagnostic Utility CD-ROM:
8.
Coaxial Directional Coupler with a 30dB port.
9.
10dB Pad attenuator.
10. 20dB Pad attenuator.
11. 50 Ohm Load, BNC.
12. Spectrum Analyzer: HP 8951E or Equivalent
Honeywell International Inc.
KXP2290 Diversity Mode S Transponder
Alignment Procedure
HONEYWELL CONFIDENTIAL
KPN 071-00224-0020
KPN 222-30128-XXXX.
001-05117-0010
Revision -
3 of 11

Advertisement

loading