Remote Control Of Buzzer And Leds - IDEC KW2D Series User Manual

Remote Control of Buzzer and LEDs

The buzzer and LED indicators can be controlled from the host device using coil relays. Even when using the buzzer and LEDs in the
standard IDEC specifications by selecting the [Use Buzzer] and [Use LED] check boxes on the [RFID Reader Settings] tab in the KW RFID
Configurator, the buzzer and LEDs can also be controlled by enabling the manual controls.
Coil Relays
Coil Relay
(00****)
0009 Enable manual control of buzzer
0010 Control buzzer
Enable manual control of LEDs
0011
(red)
0012 Control LEDs (red)
Enable manual control of LEDs
0013
(white)
0014 Control LEDs (white)
Enable manual control of LEDs
0015
(green)
0016 Control LEDs (green)
Description
Controls the buzzer.
0: Follow setting, 1: Enable manual control of buzzer
Turns the buzzer on/off.
0: Turn off buzzer, 1: Turn on buzzer
Controls the LEDs (red).
0: Follow setting, 1: Enable manual control of LEDs (red)
Turns the LEDs (red) on/off.
0: Turn off LEDs (red), 1: Turn on LEDs (red)
Controls the LEDs (white).
0: Follow setting, 1: Enable manual control of LEDs (white)
Turns the LEDs (white) on/off.
0: Turn off LEDs (white), 1: Turn on LEDs (white)
Controls the LEDs (green).
0: Follow setting, 1: Enable manual control of LEDs (green)
Turns the LEDs (green) on/off.
0: Turn off LEDs (green), 1: Turn on LEDs (green)
KW2D Series RFID Reader User's Manual
KW9Y-B2163
Chapter 5 Functions and Settings
Explanation
Initial Value
R/W
(Hexadecimal)
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
R/W 0
5-11