Advertisement
It will be. When you press the [OK] button, log data is
discarded and log
You will return to the previous screen while stopping.
Notes
• Press and hold the [Wrap] button for 2 seconds or more
to save the log data
can also do.
Automatically pause / resume logging
By using the "auto pause" function, logging can be paused
/ resumed automatically when the speed reaches a
certain speed during logging. For example, if logging is
paused automatically when it becomes 3 km / h * or less,
and you want to resume when it exceeds 3 km / h, set
"auto pause" to "valid" "To" 3.0 ".
*: Factory setting
■■ Setting auto pause function
1. Press the [Menu] button
2. Select [Settings] with the [←] / [→] button and press
the [Enter] button
3. Select [Logging] with the [←] / [→] button and press
the [Enter] button
4. Select [Auto Pause] with the [←] / [→] button and
press the [Enter] button.
5. Select [Enable] with the [←] / [→] button and press
the [Enter] button
A check mark is placed in "Enable", and the "Auto Pause"
function is turned on.
To turn it off, press the [OK] button again to remove the
check mark.
6. Select [Trigger Threshold] with the [←] / [→] button
and press the [Enter] button
7. Use the [←] / [→] button to set the speed at which
the auto pause function is automatically paused /
restarted and press the [Enter] button
8. Press the [Menu] button. The setting is completed.
Notes
• The auto pause function may not work properly when
using the roller stand, when using GPS speed or no speed
sensor.
Upload log data
You can upload and analyze the log data saved in the
internal flash memory of this machine to the analysis
service "Cyclo-Sphere ".
To upload log data to Cyclo-Sphere, the following settings
and operations are required.
① Create Cyclo-Sphere account
② Set Cyclo-Sphere account settings on this machine
③ Perform upload operation to Cyclo-Sphere
There are three ways to upload.
You can choose from log data select, differential upload,
auto upload.
• Upload from the menu item [Cyclo-Sphere] of this
machine via Wi-Fi
• Connect the unit to the PC and upload it from the upload
button of Cyclo-Sphere
• Transfer the log data from this machine using BLE using
the "Cyclo-Sphere Control App" on iPhone or Android
terminal and upload it using a telephone line or Wi-Fi
It is a free web service that uploads log data of this
machine and analyzes detailed data. It can be accessed
by web browser or special application.
Advertisement
