Page 2
Disclaimer ISIC A/S makes no representation or warranties with respect to the contents or use of this manual, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, ISIC A/S reserves the right to revise this publication and to make changes to its content at any time, without obligation to notify any person or entity of such revisions or changes.
Features Congratulations with your purchase of a DuraPANEL 8. This short form manual is designed to get you started working with your new DuraPANEL 8. The DuraPANEL 8 is designed for the demanding operating conditions at sea. The DuraPANEL 8 comes with excellent brightness and contrast levels that, ensure a good...
The DuraPANEL 8 is designed to work at demanding conditions. However, keeping the temperature and vibration level at a minimum will extend the life time of the product. ISIC recommend operating this product at normal room temperature (20-25 °C), with the lowest level of vibration and humidity.
DuraPANEL connections Below is a view of optional connections to the monitor. POWER DC LINE IN LINE OUT LAN1 USB 3.0 x 4 Connector pin-out The nominal input power voltage is 24V (18-31VDC). The input is galvanic isolated and protected against reverse polarity.
Send it to ISIC A/S for repair. Servicing the unit In case that the unit still fails after following the troubleshooting send the unit to ISIC for repair via our RMA service on our web.
ISIC info / Support In case you have inquiries or problems with your DuraPANEL 8, you have a number of possibilities to get support. Company name: ISIC A/S Head office: Edwin Rahrs Vej 54 DK-8220 Brabrand Denmark Shipping address: Holmstrupgaardvej 5...
TFT display. To regulate the acceptability of defects and protect the end user, ISIC A/S complies with the ISO 9241-307:2008 standard. This standard recommends how many defects are considered acceptable in a display, before it should be replaced within the terms of the warranty.
Page 13
Pixel Pixel defect type 1 Pixel constantly lit Pixel defect type 2 Pixel constantly dark Pixel defect type 3a Pixel defect type 3b Sub-pixel/dot constantly lit Sub-pixel/dot constantly dark (red, blue, green) (red, blue, green) Cluster A cluster consists of 5 x 5 pixels. Cluster pixel defect type 1 Cluster pixel defect type 2 Pixels in a cluster area constantly lit...
Page 14
Pixel faults accepted by ISIC A/S The maximum number of pixel faults that is considered acceptable at different screen resolutions is shown in the table below. This is the native resolution and not the resolution as adjusted by user. Class II...
Need help?
Do you have a question about the DuraPANEL 8 and is the answer not in the manual?
Questions and answers