Operation - EUFAB 21042 Operating Instructions Manual

6 Do not use any strongly focussing optical devices to look at the light beam.
7 Avoid any strong mechanical stress on the COB light fixture. Do not expose he light fixture to strong
vibrations or high temperatures.
Operating instructions
Charging the battery:
Charge the battery fully prior to first use. Remove the sealing plug on the COB light fixture bottom. Insert the
COB light fixture into the charging station.
Charging with the 230 V charger:
Plug in the charging adapter into a 230 V outlet and connect the charging cable to the charging station. The
charging station connection is located at the bottom of the charging station on the left. The indicator lamp will
light red during the charging process. The indicator lamp will switch from red to green with the full battery
capacity reached. Remove the COM light fixture from the charging station and re-close the light fixture charge
socket with the plug. The COM light fixture is now ready.
Pull the plug from the 230 V outlet and remove the cable from the charging station.
Charging on a 12 V vehicle outlet:
Plug in the cigarette lighter plug into the vehicle outlet and connect the charging cable to the charging station.
The charge socket connection is located at the bottom of the charging station on the left. The indicator lamp
will light red during the charging process. The indicator lamp will switch from red to green with the full battery
capacity reached.
Make sure that your vehicle battery is not being discharged.
Remove the COM light fixture from the charging station and re-close the light fixture charge socket with the
plug. The COM light fixture is now ready.
Pull the plug from the 230 V outlet and remove the cable from the charging station.

Operation:

Press the On/Off switch on the front side once to switch on the COB light fixture. Press the switch once more
to switch off the light fixture..
There is a rotatable hook with integrated magnet on the rear of the COB light fixture. Turn the hook into a
direction that is favourable for you and hook on the light fixture to it. Affix the light fixture onto an iron or steel
surface with the magnet.
Mounting the charging station as wall bracket
For mounting the charging station as wall bracket, you will additionally need two screws with 8 mm head
diameter size and possibly two dowels depending on the type of wall. At a distance of 30 mm vertically above
one another, drill two holes fitting your screws into the wall. Screw in the screws until a gap of 3 mm remains
between screw head and wall. Next, press the holes in the rear side of the charging station above the screws
snug against the wall and then downwards until the charging station catches on the screws.
Maintenance and care
Charge the COB light fixture every three months when not in use. Store the light fixture in a dry place. Do
neither expose the light fixture to moisture, oil, dust, dirt, high temperatures, high vibration nor mechanical
stress.
Clean the LED hand lamp only using a slightly moist, soft cloth and a mild cleaning agent. Ensure that no
cleaning agents or liquids enter the device. Do not use aggressive cleaning agents, solvents, petrol, etc.
Notes on environmental protection
Electric equipment should not be disposed of in the household waste. Please dispose of this device via
the recycling bin or the public/municipal collection points.
The materials can be recycled- You make an important contribution to protecting our environment by
recycling, material utilisation or other forms of reusing waste equipment!
Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal - Germany
Germany
Phone: +49 (0)202 42 92 83 0
Fax: +49 (0)202 2 65 57 98
Internet: www.eal-vertrieb.de
Email: info@eal-vertrieb.com