Motorschutzplatte Motorschutzplatte KAWASAKI Versys 1000 KAWASAKI Versys 1000 ab Baujahr 2010 ab Baujahr 2010 Artikel-Nr.: 3002.043.301 Artikel-Nr.:810.2515 Montage 1 linke Seite Befestigung Haltestrebe vorne links: Die Originalschraube der Motor- aufhängung demontieren (entfällt). Die Haltestrebe mit der Inbusschraube M10x80x1,25 sowie U-Scheibe Ø10,5 verschrauben.
Page 3
Motorschutzplatte Motorschutzplatte KAWASAKI Versys 1000 KAWASAKI Versys 1000 ab Baujahr 2010 ab Baujahr 2010 Artikel-Nr.: 3002.043.301 Artikel-Nr.:810.2515 Montage 3 linke Seite Befestigung der Halteplatte hinten links: Die Originalschrauben des Seitenständers entfernen (entfallen). Die Halteplatte zusammen mit dem Seitenständer mit den Inbusschrauben M10x40x1,25 sowie U-Scheiben Ø10,5...
Page 4
Motorschutzplatte Motorschutzplatte KAWASAKI Versys 1000 KAWASAKI Versys 1000 ab Baujahr 2010 ab Baujahr 2010 Artikel-Nr.: 3002.043.301 Artikel-Nr.:810.2515 Montage Montage der Motorschutzplatte: Diese wird an den zuvor montierten Haltern mit den Senkschrauben M6x16 sowie Senkscheiben Ø6,4 x 18 mm verschraubt. Nun alle Verschraubungen festziehen.
Page 5
Skid plate KAWASAKI Versys 1000 KAWASAKI Versys 1000 from date of manufacture 2010 from date of manufacture 2010 Item - No.: 3002.043.301 Item - No.: 810.2515 Assembling instructions The kit includes the following parts: Quant item no. description Quant item no.
KAWASAKI Versys 1000 KAWASAKI Versys 1000 from date of manufacture 2010 from date of manufacture 2010 Item - No.: 3002.043.301 Item - No.: 810.2515 Assembling instructions 1 left side Fastening of the left front adapter: Unscrew the original bolt at the engine mount - screw is obsolete.
Page 7
KAWASAKI Versys 1000 KAWASAKI Versys 1000 from date of manufacture 2010 from date of manufacture 2010 Item - No.: 3002.043.301 Item - No.: 810.2515 Assembling instructions left side Fastening of the left rear adapter: Dismantle the original screws of the side stand - screws are obsolete.
Page 8
KAWASAKI Versys 1000 KAWASAKI Versys 1000 from date of manufacture 2010 from date of manufacture 2010 Item - No.: 3002.043.301 Item - No.: 810.2515 Assembling instructions Fastening of the skid plate to the adapters left + right: with countersunk screws head screws M6 x 16 and countersunk washer Ø6,4.