SoClean SC1400 User Manual
  1. Manuals
  2. Brands
  3. SoClean Manuals
  4. Cleaning Equipment
  5. SC1400
  6. User manual

SoClean SC1400 User Manual

Automated cpap disinfecting system
Hide thumbs Also See for SC1400:
Table of Contents

Advertisement

Quick Links

Automated CPAP
Disinfecting
System
User
Manual
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 1
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 1
Breathe Clean. Sleep Easy.
7/2/20 5:25 PM
7/2/20 5:25 PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC1400 and is the answer not in the manual?

Questions and answers

Related Manuals for SoClean SC1400

Summary of Contents for SoClean SC1400

  • Page 1 Breathe Clean. Sleep Easy. Automated CPAP Disinfecting System User Manual A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 1 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 1 7/2/20 5:25 PM 7/2/20 5:25 PM...
  • Page 2 The SoClean 3 patented process destroys up to 99.9% of CPAP bacteria without the need for water or messy chemicals. SoClean 3 is designed to fit most CPAP models. You can visit SoClean.com/connection for a list of CPAP machines which require an adapter.
  • Page 3 TABLE OF CONTENTS Overview Warnings and Precautions Ozone Safety Introducing Your SoClean 3 Setting Up Your SoClean 3 Using your SoClean 3 Maintenance Warranty Information General Troubleshooting A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 3 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 3 7/2/20 5:25 PM 7/2/20 5:25 PM...
  • Page 4 15% to 95% non-condensing humidity * Disclaimer: SoClean does not represent through the use of the term disinfect, disinfectant or disinfection herein, or in other documentation, a kill rate of more than 99.9% of bacteria and germs in CPAP equipment A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 4...
  • Page 5 O V E R V I E W OZONE LEAKAGE The SoClean 3 meets 21 C.F.R. § 801.415 for the maximum allowable ozone accumulation of not more than 0.05 parts per million. SYMBOLS Do not use No Liquid Storage and...
  • Page 6 Disinfect Cycle. WARNING: Do not disassemble the SoClean 3 device. WARNING: Do not use the SoClean 3 device if a fragrant essence is used in the CPAP water reservoir or if highly fragrant detergents are used to disinfect the CPAP equipment.
  • Page 7 WARNING: In rare instances, those with respiratory sensitivities could experience irritation. Should this occur, discontinue use and contact SoClean. WARNING: If a strong ozone odor is detected when the SoClean 3 is operating per the instructions for use, inspect for visible damage, such as cracks in the enclosure or tubing along with tubing connections.
  • Page 8 Introducing Your SoClean 3 Say “Hi” to your new SoClean 3! I’m ready to disinfect your CPAP equipment! A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 8 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 8 7/2/20 5:25 PM 7/2/20 5:25 PM...
  • Page 9 CO N TR OL PA N EL Opens for access to the Houses all the buttons and Disinfection Chamber. icons for operating your SoClean 3. H O SE S L OT Your CPAP hose rests here during the Disinfect Cycle.
  • Page 10 I N T R O D U C I N G Y O U R S O C L E A N 3 LID LATC H Keeps the Lid of the SoClean 3 closed securely during the Disinfect Cycle and...
  • Page 11 Disinfect Cycle. back of the SoClean 3. This tube is what circulates ozone or air through your CPAP equipment during the Disinfect Cycle and Fresh Air Cycle.
  • Page 12 NOTE: There is no power button on your SoClean 3. The device is connected to power and “on” when the Power Adapter is plugged into your SoClean 3 and the AC wall socket.
  • Page 13 C YC L E NOTE: Your CPAP mask and hose must be present in the SoClean 3 with the Lid closed to operate the Disinfect Cycle. C YC L E Used to set a 2, 4, or 6 hour delay to the start D EL AY of your Disinfect Cycle.
  • Page 14 I N T R O D U C I N G Y O U R S O C L E A N 3 ICONS There are seven (7) illuminated icons on the Control Panel that the SoClean 3 uses to communicate with you. Normally, the icons are off if the device is idle and operating normally.
  • Page 15 You will not be able to operate a Disinfect Cycle or a Fresh Air Cycle. 2. Missing or counterfeit Filter. If you have installed a new Filter in your SoClean 3 and this icon illuminates solid amber when the Filter...
  • Page 16 Indicates that your CPAP hose is not present or detected when the Lid is closed. N O T E : Your SoClean 3 will not operate a Disinfect Cycle or Fresh Air Cycle if your mask and hose are not installed or detected in the unit with the Lid closed.
  • Page 17 Solid Red Indicates that an active Disinfect Cycle has been interrupted (example: temporary loss of power). NOTE: During this time, your SoClean 3 is pumping air through the system to remove ozone. A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 17 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 17...
  • Page 18 SoClean.com or contact your authorised reseller. SoClean is an independent company not affiliated with Aeiomed, Apex Medical, Carefusion, Fisher & Paykel, Philips Respironics, PMI Probasic, Puritan Bennett, RESmart, ResMed or Transcend. Names and associated trademarks are solely owned by the respective companies and manufacturers.
  • Page 19 SETTING UP YOUR SOCLEAN 3 IF YOUR MACHINE REQUIRES A Reservoir Lid Adapter: Adapter Installation Instructions A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 19 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 19 7/2/20 5:26 PM 7/2/20 5:26 PM...
  • Page 20 A D A P T E R C O N N E C T I O N : Reservoir Lid Adapter Original Lid Remove the from the CPAP reservoir base by Original Lid Original Lid opening the fully, pushing one side of the hinge tab outward and freeing the Original Lid from the base.
  • Page 21 SoClean WARNING: The Ozone Tube must be attached to the SoClean 3 adapter and the back of the SoClean 3 at all times when operating your CPAP or the SoClean. A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 21 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 21...
  • Page 22 D I S C O N N E C T I N G T H E S O C L E A N : Reservoir Lid Adapter Remove the reservoir from the CPAP machine. Reservoir Lid Remove the Adapter from the reservoir Reservoir base by opening the Lid Adapter...
  • Page 23 CPAP device. IMPORTANT: Once the adapter is installed, it is your new permanent lid. If you need to disconnect the SoClean from your adapter for travel, please reinstall the original CPAP lid onto your CPAP machine. If you fail to do this, the water in your humidifier will be pushed out through the hose and flooding will result.
  • Page 24 SETTING UP YOUR SOCLEAN 3 IF YOUR MACHINE REQUIRES A Hose Port Adapter: Adapter Installation Instructions A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 24 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 24 7/2/20 5:26 PM 7/2/20 5:26 PM...
  • Page 25 A D A P T E R C O N N E C T I O N : Hose Port Adapter Ozone Tube Connect the Adapter Tube from the SoClean to the Hose Port Adapter Ozone Port. Adapter Ozone Tube...
  • Page 26 CPAP Hose Port hose to the Adapter. SoClean is not responsible for damage to your CPAP machine resulting from equipment mishandling. WARNING: The Ozone Tube must be attached to the SoClean adapter and the back of the SoClean 3 at all times when operating your CPAP or the SoClean.
  • Page 27 P O W E R I N G Y O U R S O C L E A N 3 Power Adapter is provided to safely power your SoClean 3. You will need access to one (1) AC outlet near your SoClean 3/ CPAP equipment to power your SoClean 3. Locate an AC wall outlet near your CPAP/SoClean 3 setup.
  • Page 28 3 so that it is easy to operate and disconnect from power. NOTE: Your SoClean 3 does not have a power switch to turn the device on/ off. When initially connected to power, the lights on your SoClean 3 will flash a pattern (you may not see this if not looking at the device immediately after it is connected to power).
  • Page 29 AFTER CONNECTING THE AC POWER ADAPTER... Installing the Filter A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 29 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 29 7/2/20 5:26 PM 7/2/20 5:26 PM...
  • Page 30 I N S TA L L I N G T H E F I LT E R : Filter converts ozone back to oxygen as it leaves the SoClean Disinfection Chamber. With normal usage of one Disinfect Filter Cycle per day, the needs to be replaced approximately every 6 months or when indicated by your device.
  • Page 31 SoClean 3 with the Lid closed. Congratulations! You have successfully set up your SoClean 3 and are ready to disinfect your CPAP equipment. NOTE: If the Filter or Filter Door icon is flashing on your Control Panel, remove and reinstall the Filter, making sure the door is fully closed.
  • Page 32 AFTER INSTALLING THE FILTER... Prewash Your CPAP Equipment A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 32 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 32 7/2/20 5:26 PM 7/2/20 5:26 PM...
  • Page 33 CAUTION: Do not put Neutralizing Pre-Wash or water into the SoClean Disinfection Chamber. Do not use the Neutralizing Pre-Wash on or in the SoClean 3 device. The Pre-Wash is intended for washing CPAP equipment only. A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 33 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 33...
  • Page 34 CPAP hose or Filter is not present with the Filter Door closed. WARNING: In the event of loss of power to your home or the SoClean 3 device, you will need to rerun the entire Disinfect Cycle to make sure your CPAP equip- ment has been properly disinfected.
  • Page 35 NOTE: If you need to remove your CPAP equipment before the Disinfect Cycle is complete, see page 30 “Canceling a Cycle” section. The SoClean will operate the air pump and circulating fan for the last 5 minutes of the 1-hour cycle duration to move fresh air through the system.
  • Page 36 The Fresh Air Cycle can be used daily to freshen the air in your CPAP mask and hose before use. Typically, your CPAP mask and hose will still be in your SoClean 3 from a Disinfect Cycle and the Fresh Air Cycle can be started with a simple one-button push.
  • Page 37 U S I N G Y O U R S O C L E A N 3 The Fresh Air Cycle will take approximately 15 minutes to complete. During the Fresh Air Cycle, the Fresh Air Cycle button will illuminate blue to indicate the Fresh Air Cycle is operating.
  • Page 38 D E L AY Y O U R D I S I N F E C T C Y C L E In the event that you would like the SoClean 3 to operate at a more convenient time, you can delay your Disinfect Cycle by 2, 4 or 6 hours. For your convenience the system automatically defaults to a 2-hour delay or the last delay that you’ve selected so you can just place your mask into...
  • Page 39 U S I N G Y O U R S O C L E A N 3 During the selected delay time, the Cycle Delay button and indicator(s) blue above the button will illuminate until the Disinfect Cycle starts. NOTE: You can override the Cycle Delay after it’s set.
  • Page 40 STEP 1: Press and hold the Lid Open button for approximately 5 Seconds. NOTE: You can cancel the Disinfect Cycle at any time, regardless of where your SoClean 3 is in the process of disinfection. The SoClean 3 will pump air through...
  • Page 41 Maintenance CLEANING YOUR SOCLEAN 3 To clean, wipe the interior and exterior of your SoClean 3 device with a slightly damp cloth or CPAP wipes. Please note that the Neutralizing Pre-Wash should only be used on your CPAP equipment and should not be used on or in the SoClean 3 device.
  • Page 42 SoClean immediately if you have any issues with your Filter. Your SoClean 3 device has been designed to only work with authentic SoClean 3 Filters. You will not be able to operate your SoClean System with an inauthentic SoClean 3 Filter.
  • Page 43 ® by” SoClean before making your purchase. Your SoClean 3 device has been designed to only work with genuine SoClean 3 Filters. You will not be able to operate your SoClean System with an inauthentic SoClean 3 Filter. Warranties will be voided if the product is used with an inauthentic Filter and not replaced in accordance with usage instructions.
  • Page 44 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 44 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 44 7/2/20 5:26 PM 7/2/20 5:26 PM...
  • Page 45 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 45 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 45 7/2/20 5:26 PM 7/2/20 5:26 PM...
  • Page 46 This icon is solid There may be an on the Control Panel internal device issue. None of the lights illuminate, The SoClean 3 may not even when I press buttons be connected to power. A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 46 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 46...
  • Page 47 If the issue persists, contact SoClean customer service. Check that the AC Power Adapter is plugged-in correctly into the back of the SoClean 3 and the AC wall outlet. If the issue persists, contact SoClean customer service. A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 47 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 47...
  • Page 48 No buttons light up. I hear a click and the buttons light up blue but the Lid doesn’t open. The SoClean 3 is making a noise like it’s operating These icons are but there are illuminated on the Control Panel.
  • Page 49 The Lid may be stuck. up gently on your CPAP hose to assist in opening the Lid. Your SoClean 3 was operating Your SoClean 3 is pumping air a Disinfect Cycle and one of through the system to remove the following occurred: ozone and allow you to access your CPAP equipment.
  • Page 50 Cycle Delay countdown started. Strong scent SoClean 3 appears to There may be operate normally. physical damage of ozone during to your SoClean 3. Disinfect Cycle The ozone tube may be disconnected.
  • Page 51 Ozone Tube and broken/torn/missing gaskets in the device Lid. Check the Ozone Tube and ensure it is properly connected to the back of your SoClean 3 and your CPAP adapter. Discontinue use of your SoClean device if it is physically damaged. If you smell ozone and believe the SoClean device is not operating correctly, disconnect the power to the device and contact SoClean.
  • Page 52 SoClean Inc. 12 Vose Farm Road Peterborough, NH U.S.A. 03458 866-501-3705 SoClean.com/patents Breathe Clean. Sleep Easy. A000482-11_Rev A_070220 C000483 Rev_A A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 52 A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 52 7/2/20 5:26 PM 7/2/20 5:26 PM...

Table of Contents