SoClean SC1400 Manual
  1. Manuals
  2. Brands
  3. SoClean Manuals
  4. Medical Equipment
  5. SC1400
  6. Manual

SoClean SC1400 Manual

Automated supplemental sleep equipment maintenance system
Hide thumbs Also See for SC1400:
Table of Contents

Advertisement

Quick Links

Automated Supplemental Sleep
Equipment Maintenance System
SoClean 3 must be
activated to operate.
Read this manual,
complete the setup
checklist included and
follow the instructions
to activate.
USER MANUAL
FOR USE WITH THE PHILIPS DREAMSTATION 2
Manual en español | SoClean.com/3-es
SC1400

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SC1400 and is the answer not in the manual?

Questions and answers

Related Manuals for SoClean SC1400

Summary of Contents for SoClean SC1400

  • Page 1 Automated Supplemental Sleep Equipment Maintenance System SoClean 3 must be activated to operate. Read this manual, complete the setup checklist included and follow the instructions to activate. USER MANUAL FOR USE WITH THE PHILIPS DREAMSTATION 2 Manual en español | SoClean.com/3-es SC1400...

  • Page 2: Table Of Contents

    Warnings and Precautions Learn About Ozone Your Cleaning & Maintenance Regimen Setting Up Your SoClean 3 Washing Your Sleep Equipment Accessories Setup Checklist & Device Activation Using Your SoClean 3 Your SoClean 3: Parts & Icons Maintenance General Troubleshooting Warranty Information...

  • Page 3: Overview

    Consult with your health care professional before using this product. Read this instruction manual before operating this device. The SoClean 3 device should be used only according to the procedures described in this manual. If it is used in a manner not specified by SoClean , the safety protection provided by the equipment may ®...
  • Page 4 O V E R V I E W OZONE LEAKAGE The SoClean 3 meets 21 C.F.R. § 801.415 for the maximum allowable ozone accumulation of not more than 0.05 parts per million when operated in a room larger than 70 square feet with 8-foot or higher ceilings.

  • Page 6: Warnings And Precautions

    SoClean 3 Cycle. WARNING: Do not inhale from the Ozone Tube or the Ozone Outlet on the back of the device. Do not breathe through the mask if the SoClean 3 is operating a Maintenance Cycle.
  • Page 7 CAUTION: Do not place any flammable or ignitable items on top of the SoClean 3 device. Do not use in explosive air environments, near gas vapors, or other flammables, etc. CAUTION: Do not run the sleep equipment machine during the SoClean 3 Cycle.
  • Page 8 CAUTION: Do not use incompatible materials in the SoClean 3 such as memory foam, natural rubber and nylon, as noticeable degradation of the materials may occur.

  • Page 9: Learn About Ozone

    NOTE: Any serious incident that has occurred in relation to the device should be reported to SoClean. CAUTION: Discontinue use of your SoClean 3, consult your health care professional and contact SoClean Customer Care if acne or a rash develops along the mask contact line.

  • Page 10: Your Cleaning & Maintenance Regimen

    Your Cleaning & Maintenance Regimen The SoClean 3 can be used to supplement the regular washing interval of your sleep equipment accessories with daily maintenance. What is the difference between washing and maintaining? Washing is needed to remove residue like oils, films, debris and other build up that can naturally form on your equipment from use.
  • Page 11 Setting Up Your SoClean 3...
  • Page 12 POWERING YOUR SOCLEAN 3 Power Supply is provided to safely power your SoClean 3. You will need access to 1 AC outlet near your SoClean 3/sleep equipment to power your SoClean 3. Locate an AC wall outlet near your sleep equipment/ SoClean 3 setup.
  • Page 13 3 so that it is easy to operate and disconnect from power. NOTE: Your SoClean 3 does not have a power switch to turn the device on/off. When initially connected to power, the lights on your SoClean 3 will flash a pattern that you may not see if you are not looking at the device immediately after it is connected to power.
  • Page 14 Installation Instructions SoClean Express Adapter SoClean is an independent company not affiliated with Philips. Names and associated trademarks are solely owned by the respective companies and manufacturers. Depictions of brand logos on our website are for informational and educational purposes only and are used for customer equipment recognition. We are not affiliated or endorsed by any sleep equipment...
  • Page 15 S E T T I N G U P Y O U R S O C L E A N 3 ADAPTER CONNECTION: with a heated or non-heated hose Connect the SoClean Express Adapter to the heated or non-heated hose.
  • Page 16 You do not need to disconnect the SoClean Adapter to operate either the sleep equipment machine or the SoClean 3. WARNING: The Ozone Tube should always be connected to the SoClean Adapter and the back of the SoClean 3 unit when operating the SoClean 3.
  • Page 17 S E T T I N G U P Y O U R S O C L E A N 3 Installing the Filter...
  • Page 18 S E T T I N G U P Y O U R S O C L E A N 3 INSTALLING THE FILTER: Filter converts ozone back to oxygen as it leaves the SoClean 3 Chamber. With normal usage of one Maintenance Cycle per day, Filter needs to be replaced approximately every 6 months or when indicated by your device.
  • Page 19 SoClean 3 with the Lid closed. Congratulations! You have successfully set up your SoClean 3! Proceed to the next page for washing your sleep equipment accessories. NOTE: If the Filter or Filter Door icon is flashing on your Control Panel, remove and reinstall the Filter, making sure the door is fully closed.

  • Page 20: Washing Your Sleep Equipment Accessories

    Equipment Accessories WARNING: Do not put Neutralizing Pre-Wash or water into the SoClean Chamber. Do not use the Neutralizing Pre-Wash on or in the SoClean 3 device. The Pre-Wash is only intended for washing sleep equipment accessories with water in a sink or tub of water.
  • Page 21 • Use with water in the sink to wash your sleep equipment mask, hose and/or reservoir per the sleep equipment manufacturer’s washing instructions. • Do NOT put the Neutralizing Pre-Wash in or on your SoClean device. When do I use Neutralizing Pre-Wash? 1. To continue washing your sleep equipment accessories according to the manufacturer’s recommended interval and...

  • Page 22: Setup Checklist & Device Activation

    Setup Checklist & Device Activation Complete the steps below in order to use your SoClean 3 Sleep equipment accessories are washed in sink before first use (page 20)   SoClean is powered on (page 12)   SoClean Adapter is installed on sleep equipment machine (page 14) ...
  • Page 23 Filter is not present with the Filter Door closed. CAUTION: In the event of loss of power to your home or the SoClean 3 device, you will need to rerun the entire Maintenance Cycle to make sure your sleep equipment accessories have been properly maintained.
  • Page 24 Ozone Tube is properly connected to the Hose Port on the Adapter and to the back of the SoClean 3 (page 16). NOTE: Some head gear contains nylon which is not compatible with ozone.
  • Page 25 N OT E : If you need to remove your sleep equipment accessories before the Maintenance Cycle is complete, see the “Canceling a Cycle” section. The SoClean will operate the air pump and circulating fan for the last 12 minutes of the Cycle duration to move fresh air through the system.
  • Page 26 The Fresh Air Cycle can be used daily to freshen the air in your mask and hose before use. Typically, your mask and hose will still be in your SoClean 3 from a Maintenance Cycle and the Fresh Air Cycle can be started with a simple one-but- ton push.
  • Page 27 U S I N G Y O U R S O C L E A N 3 At the end of the Fresh Air Cycle, the Cycle Complete icon will light up green. You can now open the Lid and remove your mask and hose.
  • Page 28 U S I N G Y O U R S O C L E A N 3 DELAY YOUR MAINTENANCE CYCLE In the event that you would like the SoClean 3 to operate at a more convenient time, you can delay your Maintenance Cycle by 2, 4, or 8 hours. For your convenience, the system automatically defaults to a 2-hour delay or the last delay that you’ve selected so you can just place your mask into the Chamber,...
  • Page 29 U S I N G Y O U R S O C L E A N 3 During the selected delay time, the Cycle Delay button and indicator(s) above the button will illuminate blue until the Maintenance Cycle starts. NOTE: You can override the Cycle Delay after it’s set.
  • Page 30 Press and hold the Lid Open button for approximately 5 Seconds. NOTE: You can cancel the Maintenance Cycle at any time regardless of where your SoClean 3 is in the process of maintenance. The SoClean 3 will pump air through the...
  • Page 31 U S I N G Y O U R S O C L E A N 3 TRAVELING WITH YOUR SLEEP EQUIPMENT: ADAPTER DISCONNECTION: Remove the SoClean Express Adapter with hose and Ozone Tube from the DreamStation 2. SoClean Express Adapter...
  • Page 32 U S I N G Y O U R S O C L E A N 3 You are now ready to use the DreamStation 2. Connected with non- heated hose. Connected with heated hose. NOTE: SoClean is not responsible for damage to your sleep equipment machine or personal property resulting from equipment mishandling.

  • Page 33: Your Soclean 3: Parts & Icons

    Your SoClean 3: Parts & Icons See page 11 for setup instructions CONTROL PANEL Opens for access to the Houses all the buttons and Chamber. icons for operating your SoClean 3. HOSE SLOT Your sleep equipment hose rests here during...
  • Page 34 Y O U R S O C L E A N 3 : PA R T S & I C O N S LID LATCH Keeps the Lid of the SoClean 3 closed securely during the Maintenance Cycle and Fresh Air Cycle.
  • Page 35 One end of the Ozone Tube connects to your SoClean Adapter, and the other end comes already attached to the back of the SoClean 3. This tube is what circulates ozone or air through your sleep equipment accessories during the...
  • Page 36 Get to know the buttons used to control the device operation and the icons that will tell you what is happening. Buttons There are 4 buttons on the Control Panel that are used to operate your SoClean 3. Buttons illuminate blue when any one button is pressed to help with visibility in low-light conditions.
  • Page 37 Y O U R S O C L E A N 3 : PA R T S & I C O N S Buttons (CONT.) Starts the maintenance process with a single push. NOTE: Your mask and hose must be present in the SoClean 3 with the Lid closed to operate the MAINTENANCE Maintenance Cycle. CYCLE...
  • Page 38 Y O U R S O C L E A N 3 : PA R T S & I C O N S Icons There are 7 illuminated icons on the Control Panel that the SoClean 3 uses to communicate with you. Normally, the icons are off if the device is idle and oper- ating normally.
  • Page 39 SoClean. From the time it begins to flash amber, you have 30 days or 30 uses (whichever comes first) to replace the Filter. You can still use your SoClean 3 to maintain your sleep equipment accessories during this time.
  • Page 40 Indicates that your sleep equipment hose is not present or detected when the Lid is closed. N O T E : Your SoClean 3 will not operate a Maintenance Cycle or Fresh Air Cycle if your mask and hose are not installed or detected in the unit with the Lid closed.
  • Page 41 Flashing Blue A Cycle cancellation is in progress. Solid Red Indicates that an active Maintenance Cycle has been interrupted (example: temporary loss of power). NOTE: During this time, your SoClean 3 is pumping air through the system to remove ozone.

  • Page 42: Maintenance

    SoClean 3 device. Do not submerge the SoClean 3 device in liquid or use chemical cleaners. Do not put water inside the SoClean 3 device.
  • Page 43 Filter. Your SoClean 3 device has been designed to work only with authentic SoClean 3 Filters. You will not be able to operate your SoClean system with an inauthentic SoClean 3 Filter.

  • Page 44: General Troubleshooting

    POSS I B LE CAU SE S The warning sign appears and all three Your device is locked. buttons flash three times SoClean 3 will This icon is solid There may be an issue not operate a amber on the with the sleep equipment...
  • Page 45 Do not attempt to defeat the Hose Detect feature. Open and securely close the Filter door. Order a replacement Filter. Replace with a new genuine Filter. Unplug your SoClean 3 from its power source and plug it back in. If the issue persists, contact SoClean Customer Care.
  • Page 46 G E N E R A L T R O U B L E S H O O T I N G P RO B LE M YO U SE E None of the lights illuminate, even when you press buttons SoClean 3 will not Fresh Air button operate a Fresh flashes when pressed. Air Cycle...
  • Page 47 S OLU TI ON S Check that the Power Supply is plugged in correctly into the back of The SoClean 3 may not the SoClean 3 and the AC wall outlet. be connected to power. If the issue persists, contact SoClean Customer Care.
  • Page 48 Cycle Delay countdown started. There may be physical damage Strong scent to your SoClean 3. of ozone during SoClean 3 appears Maintenance Cycle to operate normally. (sweet chlorine-like The ozone tube may smell) be disconnected.
  • Page 49 Ozone Tube, and broken/torn/missing gaskets in the device Lid. Check the Ozone Tube and ensure it is properly connected to the back of your SoClean 3 and your SoClean Adapter. Discontinue use of your SoClean device if it is physically damaged. If you smell ozone and believe the SoClean device is not operating correctly, disconnect the power to the device and contact SoClean.

  • Page 50: Warranty Information

    ® SoClean 3 device has been designed to work only with genuine SoClean 3 Filters. You will not be able to operate your SoClean System with an inauthentic SoClean 3 Filter. Warranties will be voided if the product is used with an inauthentic Filter and not replaced in accordance with usage instructions.
  • Page 52 Thank you for purchasing the SoClean 3. Please read this entire manual carefully before using your SoClean 3 and keep it for future reference. Questions? Contact us at SoClean.com/contact For warranty information, visit SoClean.com/warranty For further questions or concerns or for more information about SoClean 3 or our other innovative products, please visit SoClean.com...

This manual is also suitable for:

33 sc1400

Table of Contents