Servicing Procedures - Jeep Renegade Owner's Handbook Manual

battery charger off;
after having disconnected the charger,
reconnect connector A to the sensor C as
in fig. 202.
202
252

SERVICING PROCEDURES

189) 190) 191)
89) 90) 91) 92) 93) 94) 95) 96)
WINDSCREEN/REAR WINDOW
WIPER
Replacing the windscreen wiper blades
Proceed as follows:
raise the wiper arm, press tab A
fig. 203 (left hand drive versions) or
fig. 204 (right hand drive versions) of the
attachment spring and remove the blade
from the arm;
J0A0700C
203
204
fit the new blade, inserting the tab in
the dedicated housing in the arm and
checking that it is locked;
lower the wiper arm on the
windscreen.
IMPORTANT Do not operate the
windscreen wiper with the blades lifted
from the windscreen.
Replacing the rear window wiper blade
Proceed as follows:
raise cover A fig. 205, undo nut B
and remove arm C;
correctly position the new arm, fully
tighten the nut B then lower the cover A.
J0A0345C
J0A0517C