Summary of Contents for Etymotic Research ETYER2XR
Page 1
Instructions For Use Proper Insertion Important: Sound quality, full bass response and noise isolation all depend on a good eartip seal in the ear canal. See a video demonstration of how to get a proper fit in the Earphone Insertion Video ...
Page 2
Remove earphones slowly with a twisting motion to gradually break the seal. Do not pull on the cable to remove the earphones. Attaching the Clip Shirt clip attaches to the splitter cable.
1. Grab the body of the earphone. 2. Pull the cable connector away from the earphone body. Do not twist. Pull straight out to prevent damage to the key tab. Note: Do not pull or twist from the cable connector. It's important to pull straight out. Attaching Cables Note: If the key tab is not aligned with the notch, snap will not engage.
1. Align the key tab with the notch in the body of the earphone and cable connector. 2. Press together until you feel it snap in. Changing Filters Etymotic earphones have special filters that smooth the frequency response and prevent earwax from entering the earphones.
Page 8
Note:Filters are not reusable. Removal Note: Use the tool to remove the filter. 1. Remove eartip. 2. Insert tool into the filter.
Page 9
3. Remove filter and discard. Replacement Note: Do not use the tool to replace the filter. 1. Insert a new filter.
2. Press gently against a hard surface to secure it in place. 3. Re-attach eartip. Cleaning and Replacing Eartips Over time eartips may lose their elasticity. For best performance and retention, replace 3-flange eartips every 60-90 days. Replace foam and glider eartips frequently. To clean 3-flange eartips: 1.
Page 11
Avoid dropping and strong impact. Leave eartips on the earphones for shock protection. Do not pull on the cord to remove the earphone from the audio device or the ear. Clean or replace eartips prior to use by others. ...