Warm Start; Stop The Machine - ZIPPER MASCHINEN ZI-RAM80C User Manual

Warm start

 Open fuel cock (K) and (c) entirely
 Set Choke lever (8) to „OPEN"
 Bring throttle lever (A) into idle speed position
 Main switch (3) ON
 Recoil start: Grip the handle (7) of the recoil starter, pull it back slightly until you feel resistance,
let it roll back, pull it out briskly in one pull entirely.
 To start to compact bring the throttle lever (A) cautious into max. speed position!

Stop the machine

 Bring throttle lever (A) into idle speed position
 Main switch (3) OFF
 Close the fuel cock (K) and (c) entirely.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RAM80C
ACHTUNG!
Open the choke only when the throttle is at
idle otherwise the rammer can start moving.
On first use or for motors that were not used
since long time perhaps is to pull the starter
rope several times so that fuel reaches the
carburetor.
NOTE
A sudden switch off the engine at full
throttle can cause engine damage.
OPERATION
29