Task manager
Display recently used applications as
thumbnails to confirm, open, switch
between, or close them.
Swipe (flick)
1
Applications are displayed as
・
thumbnails.
Swipe (flick) left or right to switch the
・
thumbnails.
❖ Information
Tap a thumbnail to open or switch the application.
・
However, depending on the displayed thumbnails,
the application may not be opened.
Swipe (flick) a thumbnail up to delete the thumbnail
・
and exit the application. Swipe (flick) the thumbnail
u
in the left end
Tap [CLEAR ALL] to clear all
thumbnails.
When "Screen pinning" (P.184) is set to ON, tap an
・
icon displayed in the upper part of thumbnail
to pin the screen so that you cannot use other
applications except the displayed one. To cancel
pinning, follow the onscreen instructions.
Alternatively, drag
・
appeared bar left or right and then release your
finger to activate an application.
up.
u
right, drag the top of the
Split screen
Split the screen to display and operate two
applications at the same time.
Activate the applications to display
・
beforehand.
Split screen may not be available depending
・
on application.
Swipe (flick)
1
Applications are displayed as
・
thumbnails.
Tap an icon appeared in the top of
2
a thumbnail
For applications which are not available
・
for split screen, "Split screen" does not
appear.
Tap the application thumbnail to
3
display from the lower part of the
[Pin]
screen.
If an application thumbnail you want to
・
display is not displayed, tap
activate the application.
When you select an application which
・
is not available for split screen, the split
screen will end.
up.
u
[Split screen].
Before Using the Terminal
to
75