- Do not use alcohol, thinner, benzine, cleaning
detergent, etc. to clean the terminal. These
chemicals may erase the printing on the
terminal or cause discoloration.
Clean the jacks or the fingerprint sensor
・
occasionally and use the terminal in a
clean state.
If the jack etc. is dirt, you may not use the terminal
normally.
When cleaning, be careful not to damage the
jack etc.
Do not leave the terminal near the air
・
conditioning vent.
Extreme temperature changes may produce
condensation and corrode the internal parts of
the terminal, causing the terminal to
malfunction.
Make sure to use the terminal without
・
excessive force.
Putting the terminal in a bag full of items or
sitting down with the terminal in a pocket of
clothes may cause malfunction or damage of the
display, internal circuit board, internal battery,
etc.
Also, doing so while the external device is
connected to the external connection jack may
cause malfunction or damage.
Use the optional devices specified by
・
NTT DOCOMO.
Using a non-specified device may cause
malfunction or damage.
Read the user's manual supplied with
・
each optional device.
Do not drop the terminal or give a
・
strong impact to the terminal.
Doing so may cause a malfunction or damage.
The terminal precautions
■
Do not press the display strongly, or not
・
operate with a sharp-pointed objects.
The display may get scratched and it may cause
a malfunction or damage.
Do not use the terminal in extremely hot
・
or cold places.
Use the terminal where the temperature ranges
between 5
and 40
℃
use in a bathroom etc. when temperature is
above 36
) and humidity ranges between 45%
℃
and 85%.
Using the terminal near a household
・
electric appliance (a TV, radio, etc.) may
cause interference in such electric
appliance.
Back up data that you saved to the
・
terminal to a microSD card, a PC, or
cloud, etc., or note down in a separate
note and keep it safely.
NTT DOCOMO is not liable for any loss of data
saved in the terminal.
Do not insert the plug of external device
・
to the external connection jack at a slant
when connecting. Or, do not pull the
plug when they are connected.
Doing so may cause a malfunction or damage.
(limited to the temporary
℃
Contents/Precautions
17