Table of Contents
Advertisement
❖ Information
If the portable hotspot starts while connecting to
･
Wi-Fi network, Wi-Fi connection is disconnected.
Wi-Fi network is automatically connected when the
portable hotspot ends.
To connect a wireless LAN device via NFC, tap [One-
･
touch portable hotspot] in Step 2.
If you operate from [Portable hotspot] in Step 2
･
[Power save] to enable power saving, the portable
hotspot will turn off automatically when the
specified time has passed without connecting to
wireless LAN devices.
Changing the portable hotspot
settings
You can change the network name (SSID),
security setting, or password set by default.
From the Home screen, [app
1
u
folder]
[Settings]
u
internet]
[Hotspot & tethering].
[Portable hotspot]
2
hotspot].
Enter the network name (SSID) of
3
the Wi-Fi access point you want to
set.
The device name of the terminal is set
･
by default.
Tap "Security" setting item
4
security type of the Wi-Fi access
point you want to set.
u
u
[Network &
u
[Configure
u
Tap a
Enter a password of the Wi-Fi
5
access point to set as required.
By default, a password is set in a
･
random manner.
[SAVE].
6
Enabling USB tethering
Connect the terminal to a PC with
1
USB cable A to C 01 (optional) etc.
(P.42).
When a screen for requesting access to
･
the device data appears, tap [DENY].
When a screen for installing driver
･
software appears, wait for a while until
the installation is complete.
When a confirmation screen of
･
installing software appears on the
terminal, tap [SKIP] or [CANCEL].
From the Home screen, [app
2
u
folder]
[Settings]
u
internet]
[Hotspot & tethering].
of "USB tethering".
3
When you use this function for the first
･
time, the driver software for the
terminal is installed to a PC. Wait for a
while until installation is complete.
u
[Network &
Settings
169
Advertisement
Table of Contents
