General Notes; Safety Informatio; Installation - Delta AG812 Instruction Manual

DELTA SCIENTIFIC CORPORATION
MODEL AG812 ACCESS GATE
General
The Delta Scientific Corporation Model AG812 Access Gate is a heavy-duty unit designed to
meet the many needs of restricted traffic control. A large array of control modes are permitted,
including auto/manual operation in conjunction with local or remote pushbutton stations, timers,
radio controls, vehicle loop detectors, infra red detectors, ticket spitters, card readers, coin or
token devices, and computerized electronic tag systems. These devices may be used
independently or in combination. In short, any device which can provide a contact closure may
be used to vend or reset the Gate.
Safety
The Model AG812 Access Gate is equipped with an electric motor driving the gate arm through
a vee-belt/gear box system. Keep hands and fingers away from the unit interior when power is
on. Shut power off before adjusting limit switches or belt tension. Wiring to the terminal strip
should be made by a competent electrician according to the NEC (NFPA 70) and applicable
local codes.

Installation

The Model AG812 is packed in a reinforced cardboard carton with an inner poly bog to guard
against moisture. Do not stack cartons or leave out in the elements until ready to set. Gate
model number and accessories are marked on carton top.
Copyright 2013 Delta Scientific Corporation Page 4 of 17
All Rights Reserved Document A2021.6