Commissioning A C3220 Camera - Huawei IVS1800 User Manual

IVS1800 Video Management System
User Manual
----End

4.4.2 Commissioning a C3220 Camera

Prerequisites
●
●
●
Context
●
●
●
●
Issue 02 (2021-01-27)
Figure 4-14 Setting secondary stream 1 parameters
If multiple cameras are connected, commission one camera first and then
commission other cameras in the same way.
The camera has connected to the smart ETH gateway and the smart ETH
gateway communicates properly with the ECC800-Pro.
The camera software version is later than SDC 8.0.RC111.
Before commissioning the C3220 camera, set the IP address for the C3220
camera based on customer requirements.
Configure the internal IP addresses of the camera and VCN or IVS1800 and
the IP address of the LAN port on the ECC800-Pro in the same network
segment.
Configure the external IP addresses of the camera and VCN or IVS1800 and
the IP address of the WAN_1 port on the ECC800-Pro in the same network.
Set the internal and external IP addresses as planned by the customer. The
following IP addresses are for reference only.
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the IVS1800
35